| Author |
 Topic Search  Topic Options
|
ACinSC 
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2737
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Chainsaw
Posted: 19 hours 25 minutes ago at 9:57am |
|
Will any 18" chain work on any brand of saw with a 18" bar?? Thanks
|
 |
|
Sponsored Links
|
|
|
Lars(wi)
Orange Level Access
Joined: 14 Sep 2009
Location: Permian Basin
Points: 7135
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 hours 1 minutes ago at 11:21am |
|
No, you have to match the drive sprocket, and the bar tip sprocket with the chain ‘eyes’ or ‘hooks’ on the underside of the chain. Not all chains are the same.
|
|
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.
|
|
Clay
Orange Level
Joined: 11 Sep 2009
Location: Udall, Kansas
Points: 9279
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 hours 54 minutes ago at 12:28pm |
|
Also need to know the gauge (width) of the chain and bar.
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 41505
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 hours 45 minutes ago at 12:37pm |
Here is a couple videos to explain a little more on chain , pitch , gauge . https://www.youtube.com/watch?v=KQgE7Clg52U
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2737
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 hours 43 minutes ago at 12:39pm |
|
Thanks guys. I have a echo saw. Been using a Oregon bar and chain that came together. So far so good. Maybe I just got lucky. Taking 3 chains for sharpening today. I'll look the chains over close. Thanks again!!
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2737
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 hours 41 minutes ago at 12:41pm |
|
Thanks for the videos Coke!!
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 51464
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 hours 59 minutes ago at 3:23pm |
|
Also, check the drive sprocket for wear...
|
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 80556
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 hours 46 minutes ago at 4:36pm |
|
you can use any Manufacturer chain and bar , as long as they are made FOR the eCHO saw..... as long as it says " for ECHO XXX" it dont matter who made it.. THey all make different pitch / size/ gauge for various applications.
|
|
Like them all, but love the "B"s.
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2737
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 hours 32 minutes ago at 4:50pm |
|
Thanks everyone!!
|
|
