Gleaner E Tailings Elevator

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello forum I have a Gleaner E and the tailings elevator scrapers are worn out (rubber part). I was planning on making my own since a whole chain seems to be kind of expensive. I plan to make these out of rubber belting. I wanted to check with the forum and see if anyone has ever made these scrapers before and if they could share the process and possibly the dimensions. 

I have a AC Gleaner Dealers Parts Catalog for Serial number 1001 & up and the part number that it shows for the rubber scraper is 1109084, but I can't seem to cross reference it to a newer number. 

Has any one ever replaced these rubber scrapers before? If so could you let me know how you performed the task and what dimensions they used? Or if you still order the scarpers at a reasonable price please that could be another route. 

Thanks,

Chris

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Outdoorsguy257 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 23 Apr 2018 Location: PA Points: 7	Post Options Post Reply Quote Outdoorsguy257 Report Post Thanks(0) Quote Reply Topic: Gleaner E Tailings Elevator Posted: 29 Sep 2024 at 11:44am
	Hello forum I have a Gleaner E and the tailings elevator scrapers are worn out (rubber part). I was planning on making my own since a whole chain seems to be kind of expensive. I plan to make these out of rubber belting. I wanted to check with the forum and see if anyone has ever made these scrapers before and if they could share the process and possibly the dimensions. I have a AC Gleaner Dealers Parts Catalog for Serial number 1001 & up and the part number that it shows for the rubber scraper is 1109084, but I can't seem to cross reference it to a newer number. Has any one ever replaced these rubber scrapers before? If so could you let me know how you performed the task and what dimensions they used? Or if you still order the scarpers at a reasonable price please that could be another route. Thanks, Chris

Sponsored Links

SteveM C/IL Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8244	Post Options Post Reply Quote SteveM C/IL Report Post Thanks(0) Quote Reply Posted: 29 Sep 2024 at 1:30pm
	I don't know what expensive means to you but you are going to have a bunch of time involved doing what you're planning. I'd say if the paddles are shot the chain is as well. Sprocket can't be far behind. There are aftermarket choices which may be cheaper than AGCO.

Alvin M Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 24 Jun 2018 Location: PA Points: 769	Post Options Post Reply Quote Alvin M Report Post Thanks(0) Quote Reply Posted: 29 Sep 2024 at 2:27pm
	AGCO Part # is 71109084 5.92 each

Outdoorsguy257 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 23 Apr 2018 Location: PA Points: 7	Post Options Post Reply Quote Outdoorsguy257 Report Post Thanks(0) Quote Reply Posted: 29 Sep 2024 at 4:11pm
	Thanks for your input and part number, I will check the sprockets out for wear. Take care.