This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


5040 rebuild/restoration advice

 Post Reply Post Reply
Author
Message
cdhendrix View Drop Down
Bronze Level
Bronze Level


Joined: 16 Jun 2021
Location: Farmington MO
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote cdhendrix Quote  Post ReplyReply Direct Link To This Post Topic: 5040 rebuild/restoration advice
    Posted: 23 Sep 2024 at 12:50pm
I'm looking for any advice or tips in regards to the 5040. I bought one before it went to the scrap yard. It rolls and the engine turns over by hand. It's missing all 3 injectors and the fuel tank.
Back to Top
Sponsored Links


Back to Top
tbran View Drop Down
Orange Level
Orange Level


Joined: 14 Sep 2009
Location: Paris Tn
Points: 3297
Post Options Post Options   Thanks (0) Thanks(0)   Quote tbran Quote  Post ReplyReply Direct Link To This Post Posted: 24 Sep 2024 at 8:57am
Don't get to deep. The engines are Fiat - 5040 5045 5050 and Long 360 2360 2460 Oliver and others .  Front grills really tough to find. Lots of cheap salvage - do the research. I would be hesitant to go into an engine and expect $$$... There were different types of pistons in the same engines and thing like that. .  
When told "it's not the money,it's the principle", remember, it's always the money..
Back to Top
cdhendrix View Drop Down
Bronze Level
Bronze Level


Joined: 16 Jun 2021
Location: Farmington MO
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote cdhendrix Quote  Post ReplyReply Direct Link To This Post Posted: 25 Sep 2024 at 7:16am
I didn't pay much for it. My initial intention is to just get it running again then go towards a full restoration. I'm not really concerned about how much money I have to spend. This is a passion project of mine.
Back to Top
tbran View Drop Down
Orange Level
Orange Level


Joined: 14 Sep 2009
Location: Paris Tn
Points: 3297
Post Options Post Options   Thanks (0) Thanks(0)   Quote tbran Quote  Post ReplyReply Direct Link To This Post Posted: 25 Sep 2024 at 2:47pm
The Romanians were passionate as well when they put their President and his wife up against the Tractor plant wall where this was built and machine gunned them .... Ceausescu,,,, look it up. 
When told "it's not the money,it's the principle", remember, it's always the money..
Back to Top
ekjdm14 View Drop Down
Bronze Level
Bronze Level


Joined: 20 Aug 2024
Location: Manchester UK
Points: 139
Post Options Post Options   Thanks (0) Thanks(0)   Quote ekjdm14 Quote  Post ReplyReply Direct Link To This Post Posted: 26 Sep 2024 at 6:58am
Indeed, passion can drive all manner of change whether political or old tractor based! Cool bit of trivia too, which I didn't know. Smile With that being said, my first port of call would be, since the injectors are already out, rig up some jump wires to get the starter turning it over & do a compression test (after verifying engine oil is present and not TOO contaminated). It could be the last guy did just that & found it to be DOA so didn't bother throwing the injectors back in.

Assuming you have decent-ish compression (for an engine that's obviously cold & has sat open for X amount of time, don't pay too much mind to the 10% rule just see that there's at least somebody home).



Edited by ekjdm14 - 26 Sep 2024 at 6:59am
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.078 seconds.


Help Support the
Unofficial Allis Forum