This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Golf cart help |
Post Reply |
Author | |
bobkyllo
Orange Level Joined: 14 Sep 2009 Location: minnesota Points: 1547 |
Post Options
Thanks(0)
Posted: 20 Sep 2024 at 2:50am |
I found a mechanic special yamaha golf cart 1994 model year. I think it's called a g5 model.
Any way it did not run. So I did some poking around and decided the ignition box was bad. Ordered one from the Amazon. It come with a new coil also. Put it on and it run great. I'm happy as a lark. Although I notice idle isn't any good. It ways to buck and lurch. It'll also back fire. Called original owner he said it has done that for some time now. He tried adjusting a micro switch on the gas pedal. Oh well it runs I'll use it faster then idle. Well today I went to use it and it spun over no fire. Kick the tires mutter some words of anger and walk away. 10 minutes later calmed down going to try it again. Climbed on and vroom away we go. What might be giving me a intermittent no start. P.s. original owner said it was giving him a occasional no start. Until it turned into a no start for good and that's when I come into the picture |
|
Sponsored Links | |
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22442 |
Post Options
Thanks(0)
|
Maybe the ignition switch is 'gimpy' ?? It's probably 30 years old, had 100,000 turns ,and well...some things just don't last forever... Check with test light at switch,then starter to see IF power is going to where it should be. You 'should' be able to get a wiring diagram for the beast. THAT is a must !! electrical IS easy WHEN you have the wiring diagram.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22442 |
Post Options
Thanks(0)
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
ekjdm14
Bronze Level Joined: 20 Aug 2024 Location: Manchester UK Points: 126 |
Post Options
Thanks(0)
|
Yes, wiring diagram would be very helpful. I know with some motorcycle CDI/ignition boxes a bad ground can cause it to have weak/intermittent spark and eventually kill the box so maybe checking grounds would be a good start.
|
|
PaulB
Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4722 |
Post Options
Thanks(0)
|
Yep, the original owner unloaded it because he knew it had problems and probably had everyone that he could get look at it without finding the cause of the issues.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
|
Lars(wi)
Orange Level Access Joined: 14 Sep 2009 Location: Permian Basin Points: 7186 |
Post Options
Thanks(0)
|
Safety switch under the seat?
|
|
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.
|
|
bobkyllo
Orange Level Joined: 14 Sep 2009 Location: minnesota Points: 1547 |
Post Options
Thanks(0)
|
Found the secondary clutch to be junk, that's why it would buck and jump at very low speeds. Also took care of the back fire condition.
Now to fix the no start at random times. It's been starting every time lately. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |