Morning Amos: Perkins usually had a flat casting block machined into the side of the engine with the identifying numbers of the engine machined into the surface. At least that was the case for the 4-236 in the 715 and 715B series backhoes. The 706 AC Forklift shares some similar components (driveline) to the AC 700 series backhoes so therefore similar.
That said, I would recommend you take a small wire brush and get after the block and hunt around for a Perkins tag or see if you can find the casting it may be buried under grease and oil build-up. HTH's ~ Orangeman
Edited by orangeman - 27 Aug 2024 at 8:52am
Topic Options
Post Options
Thanks(0)
