This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
2000 plow |
Post Reply |
Author | |
Indiana7040
Bronze Level Joined: 09 Mar 2024 Location: 47390 Points: 5 |
Post Options
Thanks(0)
Posted: 02 Aug 2024 at 6:28pm |
Hi first time posting here so I’m sure I’m not doing it right. I have a question about my 2000 plow. It’s a 5-16 trip reset and it has cast iron land slides that bolts directly to the frog instead of an inner slide and a wear pad. My cast iron ones are stamped wiese 354w. I’ve done a lot of looking and can’t find any similar replacements. Thanks in advance Also. Were these an aftermarket upgrade or what’s the point of these vs the two piece style
Edited by Indiana7040 - 02 Aug 2024 at 6:48pm |
|
Sponsored Links | |
8070nc
Orange Level Access Joined: 21 Mar 2019 Location: North Carolina Points: 505 |
Post Options
Thanks(0)
|
Try Dave the plowman
A search on the internet should bring him up |
|
1984 80780
1957 D14 DES 300 with 25000 engine 616 tractor |
|
Indiana7040
Bronze Level Joined: 09 Mar 2024 Location: 47390 Points: 5 |
Post Options
Thanks(0)
|
Seems he only deals in snap coupler plows
Edited by Indiana7040 - 02 Aug 2024 at 7:21pm |
|
8070nc
Orange Level Access Joined: 21 Mar 2019 Location: North Carolina Points: 505 |
Post Options
Thanks(0)
|
Ive got a 7 bottom on the land model 3000 plow with 387 bottoms and I got shares and landsides from him
|
|
1984 80780
1957 D14 DES 300 with 25000 engine 616 tractor |
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8379 |
Post Options
Thanks(0)
|
Send me a private message with your email or phone number. Have some pictures of parts book and we can see if can figure which bottom you have.
|
|
PaulB
Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4722 |
Post Options
Thanks(0)
|
The first thing that is needed is to determine which bottom you have as any bottom made by Allis Chalmers will bolt onto any plow frame built by Allis Chalmers.
In today's world the 387 bottom is the only bottom that there is any supply of NEW aftermarket parts for on a scale basis. There are a lot of NOS parts available if you can find what you need. Yes Dave-The-Plowman has lots of parts for Allis plows and he is even have a few things made.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
|
Indiana7040
Bronze Level Joined: 09 Mar 2024 Location: 47390 Points: 5 |
Post Options
Thanks(0)
|
How do I locate the number bottom I have ? I’m assuming I’m looking for a 3 digit number on the frog somewhere? I did order a new share from shoup for a 387 and it bolted right on. So does that mean it’s a 387. Or are some of the parts interchangeable? I’m far from a plow expert. My dad stopped plowing and sold the plows long before I was born.
Edited by Indiana7040 - 03 Aug 2024 at 9:19pm |
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8379 |
Post Options
Thanks(0)
|
Is your landslide single or double bolt. And are they plow bolt or 5/8 bolt
|
|
Indiana7040
Bronze Level Joined: 09 Mar 2024 Location: 47390 Points: 5 |
Post Options
Thanks(0)
|
My landslides have two bolts. One at the front that looks to be a 5/8 plow bolt and then one up top I believe is a 7/16 hex bolt
|
|
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3721 |
Post Options
Thanks(0)
|
Here's some reading for you.
|
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8379 |
Post Options
Thanks(0)
|
There’s a lot of good info there but didn’t see any for his model plow.
|
|
only AC orange
Silver Level Access Joined: 06 Dec 2014 Location: Eastern Indiana Points: 464 |
Post Options
Thanks(0)
|
"2000" series plows I've been around have #387 bottoms and have 387 stamped on back side of moldboard. Try Manchester Farm Supply @ North Manchester, In. for plow parts.
|
|
SteveM C/IL
Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8235 |
Post Options
Thanks(0)
|
387's have a look of their own. Short and stubby? Not long and twisty. They turn dirt like no other.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |