This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Another restoration question |
Post Reply |
Author | |
Kevin210
Silver Level Joined: 08 Oct 2018 Location: Indiana Points: 377 |
Post Options
Thanks(0)
Posted: 28 Jun 2024 at 7:46pm |
I know you guys have dealt with this issue before.
Old fuel turned to laquer/varnish in fuel tank. This tank has gooo in it now that it is almost like tar,thick and sticky.It's so gooey that I doubt nuts and bolts or pea rock will on a mixer will work. Short of taking to a professional company what might work on getting this thing clean,gas,mineral spirits,or a strong acetone.. Any thoughts.. |
|
Sponsored Links | |
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11823 |
Post Options
Thanks(0)
|
Check any local Radiator shops in your town or area. Sometimes Radiator shops do fuel tank services. If you find a shop that does fuel tanks as well, they can boil it out for you, pressure test it for leaks and seal the tank for ya at the same time. Its well worth the money spent. Before my Rad guy retired, he used to do my Tractor tanks for $150. out the door. He used to call em' and overgrown football..... Good luck! Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7338 |
Post Options
Thanks(0)
|
Like Steve says, any garage or rad shop can clean out the tank and make it new. My 1960 D14 was as bad as you described. They got it as clean as a whistle. Also have them line the tank to prevent rust from forming in the future. I do that with all of my tanks.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81333 |
Post Options
Thanks(0)
|
you could start with a gallon of laquer thinner and let it set for a week... drain and see what you got.... pressure washer might help flush some out if it gets "loose" or gummy..
I had a backhoe that set in the field for 15 year.. Tank had a lot of rust inside.. Got out what i could, then put a sediment trap in the discharge, then a BIG filter inline to the carb... Got a lot out the first 2 years... Nothing after that..
|
|
Like them all, but love the "B"s.
|
|
Kevin210
Silver Level Joined: 08 Oct 2018 Location: Indiana Points: 377 |
Post Options
Thanks(0)
|
Pretty much going to be at home job,
checked with a shop in Louisville,closet one to me that would clean it,starting at 900.00 and up... |
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3553 |
Post Options
Thanks(0)
|
acitone or crystal draino with the steam cleaner with asprayer ball
|
|
im4racin
Orange Level Joined: 12 Jun 2017 Location: Garrison ND Points: 936 |
Post Options
Thanks(0)
|
Really hot water works wonders
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3553 |
Post Options
Thanks(0)
|
we deal with this on a daily basis that stuff when it starts to look like tar will will plug fuel lines every day until every last bit is gone
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3553 |
Post Options
Thanks(0)
|
you get it clean you will not need to line the tank unless it leaks where you cant repair it
|
|
JoeM(GA)
Orange Level Joined: 12 Sep 2009 Location: Cumming,GA Points: 4660 |
Post Options
Thanks(0)
|
try some E-85 gas, the ethanol in it seems to help break down the varnish. Good luck getting a radiator shop to do anything but a re-core, EPA has pretty much put them out of business doing anything.
|
|
Allis Express North Georgia
41 WC,48 UC Cane,7-G's, Ford 345C TLB |
|
injpumpEd
Orange Level Access Joined: 13 Sep 2009 Location: Walnut IL Points: 4917 |
Post Options
Thanks(0)
|
as Joe said, E85 works really good as a fuel tank/parts cleaning solvent for old gummy diesel/biodiesel. Use it to flush tanks, and filter bases. Brakleen to spray through injection lines as well as supply & return lines. Sadly you cannot run it through the fuel injection system though lol!
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11823 |
Post Options
Thanks(0)
|
Wow! $900. bucks! What a rip!! Sheesh! Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
tadams(OH)
Orange Level Access Joined: 17 Sep 2009 Location: Jeromesville, O Points: 10139 |
Post Options
Thanks(0)
|
$900.00 Just his way of say I don't want to do it.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |