| Author |
 Topic Search  Topic Options
|
MadCow 
Bronze Level
Joined: 27 Aug 2023
Location: South Dakota
Points: 112
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Lift/lower lever arm
Posted: 20 Nov 2023 at 2:30pm |
|
Does anybody know where you can get a lift/lower lever arm or rebuild? The little nib is too small so it keeps popping out of the lower/raise detents.
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20479
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 2:38pm |
|
So, we are talking a D-14-15-17 ????????
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22443
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 3:42pm |
|
My D-14 Troy, was built up with bronze 30 year ago.....using oxy/act torches...
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20479
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 3:50pm |
|
I fixed the one on my D17 XT by replacing the pin with a 6mm bolt and double nuts. Used the open threaded end of the bolt as the new pin. Was able to stand it up 1/16" taller to make up for the wear on the window itself, which if the pin is worn, the window ledge is too.
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2759
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 4:18pm |
|
Fixed the one on my D 15 back in 2019 . Then found out you should not leave the lever locked in the up position. Guess it's okay to leave it in the down position ? Thanks
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22443
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 5:37pm |
Down is good, inbetween OK... Mine could be locked in 'up' as PO used hydraulics out back for 'something'. Maybe a hydraulic motor ?? There was a 3/8" pipe on left side of hyd pump section. I put pipe plug in it years ago.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 2759
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2023 at 6:43pm |
|
Thanks Jay, that makes sense.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20479
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Nov 2023 at 6:45am |
|
Your biggest challenge may be removing the pivot pin that retains the lift/lower lever onto the shaft. It may be rusted tightly in place. I think I had to unbolt the steering column to get things apart and back together.
|
|
MadCow
Bronze Level
Joined: 27 Aug 2023
Location: South Dakota
Points: 112
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2023 at 9:26pm |
|
Thanks guys. I was hoping someone made a new or had NOS somewhere. I'd like to eventually restore this tractor. But trying to plow with the lever not staying in the down position made me want to scream. Probably drill it out and do a bolt.
|
|
