| Author |
 Topic Search  Topic Options
|
Leon B MO 
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2110
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 80xx "blinker" switch replacement
Posted: 14 Sep 2023 at 4:58pm |
In a previous post about an 8030 with flasher issues, the blinker switch was talked about and said a John Deere part #ar64422 was a good replacement. I did a search and found Stiener Tractor had a replacement part, said it works on Gleaner, Case, Allis and others. In the past I have asked my Agco dealer about the original part number but was told it was unavailable. I did order the part from Steiners, installed it today. It looks identical, the original AC plug fit right on the back of the switch. I turned on the flashers and all 4 flashers came on including the "blinker" light in the dash, which isn't supposed to come on until the blinker is activated. I turned the "blinker" to left and right but nothing changed. All 4 flashers flash. So, do I have a bad component from Steiner or is this part not compatible with the AC and Gleaner. I have several 80xx tractors that I would like to have turn signals on. Thanks all Leon B MO
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
 |
|
Sponsored Links
|
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 8:05pm |
|
There was a service bulletin from AC at one time that told a change in wording to change. It also came in box with new switch. I'm sure some on here has that bulletin. MACK
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2282
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 8:14pm |
|
Like Mack says, there was a wiring change needed on earlier serial number tractors. Evidently something was changed in the switch that required this wiring change. I believe that it was a ground wire that has to be cut and then it was connected to another wire with a blue scotch lock connector.
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8380
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 8:30pm |
Ryan in that other post supplied a conversation kit number 277406. Say’s available
Edited by Mikez - 14 Sep 2023 at 8:32pm
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8380
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 8:42pm |
|
Maybe he will chime in. I’m curious as to where he got this part number
|
|
ryan(IN)
Orange Level
Joined: 11 Sep 2009
Location: Bluffton,IN
Points: 764
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 9:00pm |
Page 38 in parts book under flasher it says (SWITCH, FLASHER, TURN SIGNAL (INCL. KNOB, 3/4" LOCKWASHER & NUT, & PAN HD. SCREW W/LOCKWASHER) (SERVICE W/SWITCH 70275866 & CONVERSION KIT 70275870) (PRIOR S/N 2998)
That conversion kit # supercedes to the 70277406. This is the flasher unit and a blue wire that you change. Have 16 in batavia parts depot. Lists for $114. I have one in stock at work that has the bulletin about what wire you change. I can get a scan of it and post it if needed. On Steiners site it shows the wiring instructions. I would bet their switch needs a wire changed just like the agco switch.
Edited by ryan(IN) - 14 Sep 2023 at 9:02pm
|
|
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8380
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2023 at 9:07pm |
|
Thanks I got it now.
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2110
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2023 at 7:28am |
|
Thanks all. I'll see what I can find on Steiners site
Leon B Mo
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
