| Author |
 Topic Search  Topic Options
|
DCAC 
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Brake rod
Posted: 01 Jun 2023 at 7:03pm |
Looking for a good used or NOS brake rod for a Series 4 D17, part number 237331, only need one, but might take a couple if someone has them. Not sure how this one got broken, but the hook end is missing on the left one,  .
|
 |
|
Sponsored Links
|
|
|
200Tom1
Orange Level
Joined: 03 Jun 2019
Location: Iowa
Points: 1220
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Jun 2023 at 9:42pm |
|
I broke one several years ago. You might want to look, my memory is bad, I think the left and right were different. But please check that out. Like I said memory is like burnt toast.
|
|
DCAC
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Jun 2023 at 9:53pm |
|
I wondered if they were different as well, checked my parts book, and according to that, they are the same.
|
|
DCAC
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Jun 2023 at 9:55pm |
Thanks for the advice 200Tom1,
|
|
Jasonw
Bronze Level
Joined: 11 Dec 2017
Location: MD
Points: 61
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2023 at 7:07am |
|
They are still available from Agco, about $55 per rod.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20494
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2023 at 10:16am |
|
The hook on the end is where they usually did break. You can cut it off a little run a 3/8" die up on the remaining rod 2 inches and get a 3/8" threaded yoke to screw on in place of the broken hook.
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7332
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2023 at 9:21pm |
|
AGCO has new ones
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2283
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2023 at 9:48pm |
|
The way that the Dr. describes is better, stronger, and provides an easier way to adjust the brake.
|
|
DCAC
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
Post Options
Thanks(1)
Quote Reply
Posted: 02 Jun 2023 at 10:05pm |
Many thanks for all the replies, Gentlemen! I hadn't checked with AGCO when I put this post up, was kind of a spur of the moment decision, and had originally thought of fixing it like the Good Doctor suggested. I thought I'd check with you all on here before proceeding with that. I did buy a 3/8" threaded hardware hook and threaded coupler, and that's how I'll go for now. I can order a new rod if this doesn't work. Thanks again, everyone!
|
|
