| Author |
 Topic Search  Topic Options
|
boomer573 
Bronze Level
Joined: 01 Jun 2022
Location: Central Missour
Points: 4
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 3 Point Rebuild
Posted: 05 Aug 2022 at 8:20am |
I am needing to rebuild the pivot pins (2 per side) as they are worn 1/2 way through. Does anybody sell the rebuild kits? I don’t know who made these or what these would be called for a google search. Thanks. 
|
 |
|
Sponsored Links
|
|
|
Boomer
Bronze Level
Joined: 13 Sep 2009
Location: Mid Missouri
Points: 102
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2022 at 8:23am |
|
Also, I need the threaded bolt at the end.
|
|
BrianC
Orange Level Access
Joined: 16 Jun 2011
Location: New York
Points: 1619
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2022 at 8:43am |
I don't think that is an original Allis-Chalmers 3pt hitch (but what do I know). Maybe post more pictures of the whole hitch in the hope that someone will recognize it.
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7472
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2022 at 8:37pm |
That is not a factory 3 point hitch assembly. Looks like an aftermarket kit that has already had some additional welding done to it.
Just take the offending pieces to a local fab shop. They can make them as good as new.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 5040
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2022 at 6:34am |
Very likely a homemade hitch. Those pivots look like the ones used on early WD pin hitch plows. A good picture of the complete hitch will help in identifying homemade or ???
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
