| Author |
 Topic Search  Topic Options
|
hmontena 
Bronze Level
Joined: 28 Jan 2022
Location: Pioneer Valley
Points: 11
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Allis 614 forklift
Posted: 30 Jan 2022 at 7:13am |
Just found an Allis614 forklift. It is in good shape, the motor is stuck, G160. I don't think I am going to rebuild it. I did find a 3.152 Perkins diesel Will it bolt up to trans or do I have to make an adapter plate ?
Thanks
|
 |
|
Sponsored Links
|
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 11823
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2022 at 8:22am |
I would see if you can get the engine unstuck and see how it runs. Some engines unstick easy, some are tough. Depends on where they were sitting. Outside or inside, and whether it had spark plugs screwed in it or not. Ya never know. Sometimes they break loose with different formulas poured down the spark plug holes to get things loose again... Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7341
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2022 at 10:05am |
|
Perkins will not bolt up. You will need an adaptor plate to start with, and probably more fab work along the way. Get the G160 freed up and you can rebuild it.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4762
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2022 at 11:27am |
|
If you find a G138 or G149 they would bolt right in and everything would fit in place, just be a little les power.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
