| Author |
 Topic Search  Topic Options
|
PaulB 
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4739
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Wanted Loader brackets
Posted: 17 Apr 2021 at 6:44am |
|
I'm looking to find a pair of the rear mounting brackets for a 400 series loader on a d14/15 tractor. The RH bracket would be 70344904 or 343362. The LH bracket would be 70344905 or 70343363. Even just 1 would be a big help.
Edited by PaulB - 18 Apr 2021 at 6:50am
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
 |
|
Sponsored Links
|
|
|
DON G
Silver Level Access
Joined: 14 Feb 2014
Location: Lowpoint, IL
Points: 407
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Apr 2021 at 9:45pm |
|
I easily made some for D17.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4739
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Apr 2021 at 6:51am |
|
D17 brackets are just a bent piece of angle, completely different from the weldment for a D14/15.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DON G
Silver Level Access
Joined: 14 Feb 2014
Location: Lowpoint, IL
Points: 407
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Apr 2021 at 8:11pm |
OK Paul. 
|
|
Joe(TX)
Orange Level
Joined: 11 Sep 2009
Location: Weatherford. TX
Points: 1682
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Apr 2021 at 9:51pm |
This is what the D14/D15 brackets look like.
|
|
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1438
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2021 at 10:01pm |
|
Paul...Did you get this resolved...Dale
|
|
Kenny L.
Orange Level Access
Joined: 12 Sep 2009
Location: NEIOWA
Points: 1273
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 May 2021 at 8:11pm |
|
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4739
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 May 2021 at 8:44pm |
Yep, that's what I'm looking for.
What is the size and thickness of the angle that they are made from?
Edited by PaulB - 17 May 2021 at 8:46pm
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5391
|
Post Options
Thanks(1)
Quote Reply
Posted: 18 May 2021 at 3:55pm |
|
Paul
Took some measurements of the brackets of my 415 loader.
Mine are like those in the actual orange pictures, which you note are different from the sketch from the Parts Catalog.
The Horizontal piece: 2 1/2 X 3"
10" long L, 3/8" thick, 2 holes 7 1/8" apart.
The horizontal side with holes is 3" wide, vertical side is 2 1/2" high.
Sloped piece with 'U' bolt: 3 1/2 X 3 1/2"
9 1/2" long, 3/8" thick, welded to Horizontal piece @ 45'
'U' Bolt is 3/4" diam.
The welded position of the sloped piece would be critical because the frame is bolted with 3 bolts to the Engine side frame / rail.
Probably best to assemble everything in position and tack weld first.
HTH
Gary
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4739
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 May 2021 at 7:06pm |
|
Thanks: That give me something to go on if I'm unable to find a pair.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DON G
Silver Level Access
Joined: 14 Feb 2014
Location: Lowpoint, IL
Points: 407
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 8:22am |
|
If you can't find a u bolt an angle iron with holes drilled will work on top, then use bolts.
|
|
JimIA
Orange Level
Joined: 12 Sep 2009
Location: Castalia Iowa
Points: 1980
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 1:54pm |
I think we have some NOS ones here. I will try to get a picture of them.
Jim
|
|
An open eye is much more observant than an open mouth
|
|
JimIA
Orange Level
Joined: 12 Sep 2009
Location: Castalia Iowa
Points: 1980
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 4:20pm |
|
|
|
An open eye is much more observant than an open mouth
|
|
JimIA
Orange Level
Joined: 12 Sep 2009
Location: Castalia Iowa
Points: 1980
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 4:23pm |
|
|
|
An open eye is much more observant than an open mouth
|
|
JimIA
Orange Level
Joined: 12 Sep 2009
Location: Castalia Iowa
Points: 1980
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 4:24pm |
|
Shipping tag number says 387416.
|
|
An open eye is much more observant than an open mouth
|
|
ZachD89
Orange Level
Joined: 24 Dec 2015
Location: Littlestown,PA
Points: 702
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 6:44pm |
|
I have a pair of those brackets and did not even know what they are till now.
|
|
37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner
|
|
Kenny L.
Orange Level Access
Joined: 12 Sep 2009
Location: NEIOWA
Points: 1273
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 6:49pm |
 JimIA wrote:
I think we have some NOS ones here. I will try to get a picture of them.
Jim |
Show off You been holding out on me again I see.
|
|
Kenny L.
Orange Level Access
Joined: 12 Sep 2009
Location: NEIOWA
Points: 1273
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 6:55pm |
Gary wrote:
Paul
Took some measurements of the brackets of my 415 loader.
Mine are like those in the actual orange pictures, which you note are different from the sketch from the Parts Catalog.
The Horizontal piece: 2 1/2 X 3"
10" long L, 3/8" thick, 2 holes 7 1/8" apart.
The horizontal side with holes is 3" wide, vertical side is 2 1/2" high.
Sloped piece with 'U' bolt: 3 1/2 X 3 1/2"
9 1/2" long, 3/8" thick, welded to Horizontal piece @ 45'
'U' Bolt is 3/4" diam.
The welded position of the sloped piece would be critical because the frame is bolted with 3 bolts to the Engine side frame / rail.
Probably best to assemble everything in position and tack weld first.
HTH
Gary
|
Gary thanks for taking the time to measure the bracket, I'm dealing with a leg injury and don't know if I could've got the measurements but would've tried if you didn't post them.
Edited by Kenny L. - 19 May 2021 at 6:56pm
|
|
Alex09(WI)
Orange Level
Joined: 15 Mar 2012
Location: CECIL WI
Points: 1699
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 9:05pm |
Kenny L. wrote:
JimIA wrote:
I think we have some NOS ones here. I will try to get a picture of them.
Jim |
Show off You been holding out on me again I see.
|
hahaha! That was pretty awesome of Jim! Just like magic!
|
|
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
|
JimIA
Orange Level
Joined: 12 Sep 2009
Location: Castalia Iowa
Points: 1980
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 May 2021 at 11:52pm |
|
Kenny, I can't give you all my secrets!
|
|
An open eye is much more observant than an open mouth
|
|
Kenny L.
Orange Level Access
Joined: 12 Sep 2009
Location: NEIOWA
Points: 1273
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 May 2021 at 6:51am |
JimIA wrote:
Kenny, I can't give you all my secrets! |
I know buddy, you've been good to me over the years with your secrets, see you Saturday.
|
|
structures
Silver Level
Joined: 28 Feb 2011
Location: Beggs, OK
Points: 333
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Apr 2022 at 9:27am |
Gents, I bought a 400 loader with I think 45 brackets. Wondering if either somebody has the D15 brackets for sale or if I could get a little more detail on the U bolts. Is that 7-1/8" spacing (Gary mentions above) on center or inside dimension?
Thanks for the help.
|
|
|
|
