This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
ARK 600 loader value? |
Post Reply |
Author | |
Bird76Mojo
Silver Level Joined: 12 Mar 2015 Location: Illinois Points: 221 |
Post Options
Thanks(0)
Posted: 11 Dec 2020 at 8:08pm |
I have an ARK 600 front end loader for the Powermax series of tractor. I was wondering what everyone here thought they were worth these days. I know what I paid years ago, and I've never really seen them go down in value..
It does need a couple hoses, etc, but it functioned when I bought it. It's not the prettiest thing in the world as far as cosmetics, but would make a great candidate for a restoration. I do have a new hose or two for it that I never installed. I also have the subframe and pump for it. Thoughts? I can get some pictures in the next few days.. GB :) Edited by Bird76Mojo - 11 Dec 2020 at 8:08pm |
|
Sponsored Links | |
AC720Man
Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4926 |
Post Options
Thanks(0)
|
I guess someone, a collector maybe that may be interested will be willing to pay a $1,000 if it’s in workable condition.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
Bird76Mojo
Silver Level Joined: 12 Mar 2015 Location: Illinois Points: 221 |
Post Options
Thanks(0)
|
I'd think it would be easily worth a thousand. There's not any others up for sale that I can find. They don't pop up that often either.
I don't know of any other similar sized loaders for any other tractor models that would sell for a thousand. Thanks for the thoughts. I appreciate it. GB :) |
|
AC720Man
Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4926 |
Post Options
Thanks(0)
|
You can always put a higher price on it to see if you get someone interested. Without seeing a picture of the condition I may be on the low side. Just going by your description of condition.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11823 |
Post Options
Thanks(0)
|
A few posted pictures saves a lot of guesswork.
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
Bird76Mojo
Silver Level Joined: 12 Mar 2015 Location: Illinois Points: 221 |
Post Options
Thanks(0)
|
Sorry guys, no pics just yet. I was just looking for a roundabout value I guess. I had bigger fish to fry today. My furnace quit. So I was diagnosing that and calling all over for parts. Finally got what I needed locally, but at a 1100% markup of what another one (same exact brand) cost me on Ebay later on.. (figured I might as well have another on hand and save $110 while I'm at it, for when it quits again) GB :) |
|
talntedmrgreen
Silver Level Joined: 25 Jun 2013 Location: Caledonia, MI Points: 477 |
Post Options
Thanks(0)
|
The powermax loaders are really not all that uncommon. The 600 tends to fetch the least $$, as it was the weaker design of the offerings. The 700 was beefed up, and the Danco's were designed with a much nicer mounting system. The Danco SV41 even allowed mower deck or mid mount sickle use, and tends to be the most desirable and hardest to find.
Anyone looking for a loader and inspecting a 600 should look hard for cracks and weld repairs, as they are almost a garauntee. I still think $1500 would be easy to get for a nice condition, ready to work 600.
|
|
Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |