| Author |
 Topic Search  Topic Options
|
PA185 
Bronze Level
Joined: 08 Mar 2019
Location: Pennsylvania
Points: 67
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190 Holley Carb
Posted: 13 Nov 2020 at 1:54am |
|
I’m putting together a 260ci engine right now, ported, polished, C5 performance manifold/header, Blackburn cam, now it comes down to a carb choice. I have a bendix off a 190, and a Holley off a 190. Opinions on which carb would be better choice? I’ve heard the Holley is great when it’s working proper.
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20528
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 5:24am |
|
Bendix from a 190XT G-2800 engine, not a 190 G-2500 engine.
|
|
PA185
Bronze Level
Joined: 08 Mar 2019
Location: Pennsylvania
Points: 67
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 6:22am |
|
I was using the term 190 pretty much as an umbrella for the 190 & 190XT. If there are differences in the carbs (positive there is) I’m all ears.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4742
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 6:54am |
I am running a Holley on a CA. It is easier to tune as it uses the same jets as all other Holley carburetors. Although the drawback is that very few parts are available for them. About all you can find are gaskets and floats, unless you come across NOS parts. I have a very large NOS Bendix/Zenith available.
Edited by PaulB - 13 Nov 2020 at 7:02am
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20528
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 7:14am |
|
A G-2800 carb is more air flow and jetted to match.
|
|
48ACWD
Silver Level
Joined: 06 Jan 2013
Location: Pennsylvania
Points: 208
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 10:33am |
|
I have a carb off of a G combine 301 motor if anyone is interested.
|
|
Charlie175
Orange Level
Joined: 11 Sep 2009
Location: Shenandoah, VA
Points: 6358
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 11:38am |
|
Are you making a custom adapter for the manifold? Or will it bolt up?
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
|
PA185
Bronze Level
Joined: 08 Mar 2019
Location: Pennsylvania
Points: 67
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 1:46pm |
|
The header is going to be tailor made to the carb
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 9:26pm |
|
1.70 ratio roller rockers will help give it some more torque. Make sure u degree cam.
Call or text
608 228 4843
Rob
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2020 at 9:28pm |
|
1.70 ratio roller rockers will help give it some more torque. Make sure u degree cam. $275 plus shipping
Call or text
608 228 4843
Rob
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Nov 2020 at 6:42pm |
|
|
|
PA185
Bronze Level
Joined: 08 Mar 2019
Location: Pennsylvania
Points: 67
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2020 at 3:12am |
|
Anyone else have some input or experience running either one?
Edited by PA185 - 17 Nov 2020 at 3:17am
|
|
