This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
XT190 seat |
Post Reply |
Author | |
WD in Australia
Bronze Level Joined: 25 Jul 2019 Location: VIC, Australia Points: 157 |
Post Options
Thanks(0)
Posted: 02 Oct 2020 at 5:56pm |
Any ideas on best place to buy replacement bottom and middle sections for XT190 seat? Any thoughts on good quality sellers would be appreciated.
|
|
WD(NF), WD45(WF), WD45D(WF), XT190D(WF), Model U, Gleaner C, All Crop 60, Rotobaler
|
|
Sponsored Links | |
d17brown
Orange Level Joined: 11 Sep 2009 Location: farley iowa Points: 1679 |
Post Options
Thanks(0)
|
I can get you plain white or black and white cushions
|
|
phil
|
|
KJCHRIS
Orange Level Joined: 21 Dec 2015 Location: WC Iowa Points: 882 |
Post Options
Thanks(0)
|
DJ's that has adds on here has the cushions, either wood or metal backing. Just costs more for the better metal ones. Inside a cab the wood should last for years.
$200 for all 3 cushions on wood backing. $380 for all 3 cushions on metal backing. They also have all the parts to rebuild the suspension on that super deluxe model seat. I've rebuilt 3 of these in last 2 years. Made the pins, cut bushings from bulk stock, repaired lever that is on bottom of shock absorber the bushings in it wear thru and then pin cuts into lever. I usually weld steel tubing in that fits the OD of bushings, rather than replace lever. , rebuilt 2 of seat frames. It gets expensive but I'll never wear them out again, and they ride SO much better. Their prices look HIGH but if I paid shop labor rate for making / fixing parts would be about the same, and I've another day or more in invested a set of pins, #DJSPINSET @ $60.00 a set of bushings, #70227910 @ $29.75 a hardware kit, #SEAT001 @ $12.75 w/ 2 washers, 6 rollpins, 2 clips. seat shock absorber, #AC-2190 @ $107.50. the frame the cushions attach to, #70243509 @ $265.00 lever/arm that shock attaches to. ?? Other venders here also have the cushions as do the online and catalog places.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
Pete from IL
Silver Level Joined: 29 Dec 2009 Location: Beecher IL. Points: 311 |
Post Options
Thanks(0)
|
I bought the more expensive seat cushions from DJ's and the pins and bushings. I was happy with all the parts I got from them. You can look them up online.
|
|
WD in Australia
Bronze Level Joined: 25 Jul 2019 Location: VIC, Australia Points: 157 |
Post Options
Thanks(0)
|
Thanks for the help guys. Will have a closer look under the seat to see what what else might need doing. Tractor has only done 2900hrs so might still be okay.
|
|
WD(NF), WD45(WF), WD45D(WF), XT190D(WF), Model U, Gleaner C, All Crop 60, Rotobaler
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |