| Author |
 Topic Search  Topic Options
|
Dave Wisc. 
Orange Level
Joined: 12 Jun 2015
Location: Wisc.
Points: 216
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WD45
Posted: 24 Jan 2020 at 3:04pm |
|
I was plowing snow today with the WD45 . It makes a cracking sound in the back rim so is that the eccentrics are worn bad or the rails???thanks
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21818
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2020 at 3:07pm |
|
Check the 8 bolts in the center of the wheel first.
|
|
Dave Wisc.
Orange Level
Joined: 12 Jun 2015
Location: Wisc.
Points: 216
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2020 at 3:35pm |
|
Ok will tomorrow
|
|
Dave(inMA)
Orange Level
Joined: 12 Sep 2009
Location: Grafton, MA
Points: 2399
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2020 at 5:38pm |
|
Could be a loose eccentric, too.
|
|
WC, CA, D14, WD45
|
|
Alex09(WI)
Orange Level
Joined: 15 Mar 2012
Location: CECIL WI
Points: 1747
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2020 at 5:48pm |
if you hear the sound when going from forward to reverse, then it is the eccentrics letting the center move back and forth between the stops in the rail.
If it makes the sound when going at a constant speed in one direction, tighten the 8 bolts holding the center disk to the axle flange.
|
|
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
|
Sugarmaker
Orange Level
Joined: 12 Jul 2013
Location: Albion PA
Points: 8476
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2020 at 6:31pm |
Also check to see if the eccentrics are turned to the lock position too. I would doubt that the rails would be worn, unless something is very loose. Cold weather can test everything! Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Dave Wisc.
Orange Level
Joined: 12 Jun 2015
Location: Wisc.
Points: 216
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2020 at 11:14am |
|
Ok checked the 8 center bolts they were not loose.It only does it going forward.The eccentrics are tight soI am thinking that they are worn bad enough to cause it to crack sound. Another thing it only does it on a really hard pull. I have never hear it when mold board plowing.
|
|
Ted J
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2020 at 6:14pm |
|
Yeah, your eccentric blocks are worn after years of use. I had that happen once to me. I pfarted around for a week trying different things and in the end, I called Sandy Lake and got some new ones. They are still solid, no squeaking.
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|
Dave Wisc.
Orange Level
Joined: 12 Jun 2015
Location: Wisc.
Points: 216
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2020 at 7:28pm |
|
When you buy new eccentrics you get both the pin and the other piece that the pin goes into
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 5085
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2020 at 5:44am |
|
I've loosened them up and slid a piece of a hacksaw blade into them to tighten them up.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
Gary (sw Wis.)
Silver Level Access
Joined: 12 Sep 2009
Location: S.W. Wis.
Points: 215
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2020 at 8:10am |
I did what Paul did but I used band strap it's been 15 plus years and it's still working fine.
|
|
190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60
|
|
