| Author |
 Topic Search  Topic Options
|
Bobo Husker 
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190 puller
Posted: 19 Jun 2019 at 9:47am |
|
Hoping for some advice. Completed a-pump installation on 190. Works great however when I pull, I'm getting a crazy bounce. Some ole timers said not enough tire pressure, I'm running 13 psi on Good year dynatorques. 18.4r38. Some said try dropping hitch 1/2" and also could be clutch. I'm running an Atlas 11" double disk. I use 7th gear.
Any thoughts would be appreciated.
|
 |
|
Sponsored Links
|
|
|
Steve Bright
Orange Level
Joined: 14 Sep 2009
Location: Martinsville, I
Points: 2104
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 12:03pm |
Sounds like power hop to me, Not balanced correctly
|
|
frnkeore
Silver Level
Joined: 07 May 2019
Location: Southern Oregon
Points: 362
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 12:04pm |
|
My thought's are, to much pressure.
More air pressure will give you less of a contact patch and you'll spin earlier. Not good.
Less will give you, more contact and have less energy to bounce. I believe that the only way to start a bounce, is to have slippage, first.
Sometimes, problems can be diagnosed with extremes, see what happens at 8 lb.
|
|
Frank
1959 D17 Series I #24001+, '59 D14
'55 & '59 Ford 850 & 861
Ferguson TO 35 Deluxe, Oliver 70 and 5 more.
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3787
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 12:34pm |
|
radials?
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 1:02pm |
|
Yes radials. It starts in front till whole tractor will bounce.
|
|
Allisplumber
Bronze Level
Joined: 04 Jan 2016
Location: Wisconsin
Points: 76
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 2:20pm |
|
I would say try less pressure in the rear tires, a flat ball doesn’t bounce, I have better luck with my 200 with the tires softer and have enough weights to move around to balance it out , do you have a center weight bar , weights in the middle seem to do better, just my opinion
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Jun 2019 at 2:56pm |
|
I do have a weight bracket in front of rear tires.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21021
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jun 2019 at 7:22am |
|
Weigh the tractor as you have it. If it weighs 6000 lbs, I would try 2000 lbs on front wheels and 4000 lbs on the rear wheels AS A STARTING POINT. Also, shift it into road gear and see if the clutch slips or kills the engine. That will diagnose that issue. Sounds like you are too heavy on the nose.
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jun 2019 at 10:07am |
|
I have to weigh 6500# total. I'm in 7th. Its 20mph pace.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21021
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jun 2019 at 12:10pm |
|
So it looks like 4400 on the rear and 2100 on the front.
|
|
goomer
Bronze Level
Joined: 18 Feb 2016
Location: wi
Points: 51
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jun 2019 at 7:44pm |
|
I run 13-14psi and seems to work good. Firestone 23 degrees. Narrow tire stance with tires an inch from stock fender location. 190 a-pump 7th gear also. 6500lbs, I run with no weights and no bounce. 7500lbs 3-5 weights on front the rest on the back. Before I removed power director had a lil bounce off the line up to maybe 100 foot line but none on the other end. I'd try different tires.
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jun 2019 at 2:16pm |
|
Yup I dont run PD either. I'm going to try hitch height alittle lower first. I'm weighted pretty much as Dr Allis suggested.
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jun 2019 at 2:33pm |
|
Goomer-what do you run for a clutch?
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8191
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jun 2019 at 2:50pm |
|
Stupid question, how do you run 7 th gear without a Power director?
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jun 2019 at 5:37pm |
|
Coupled straight to low side.
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8191
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jun 2019 at 7:56pm |
|
Ok Gottcha, thanks
|
|
goomer
Bronze Level
Joined: 18 Feb 2016
Location: wi
Points: 51
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jun 2019 at 9:52pm |
|
I run a 2 disc kennys pulling clutch
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jun 2019 at 10:24pm |
|
Got ya thanks.
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2019 at 8:47am |
|
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2019 at 8:49am |
|
Dr Allis, I moved weight back. Helped alot. Seems like still abit front heavy? Taking notes for next year.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21021
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2019 at 5:57pm |
|
In the video, it looks like you have 250-400 lbs on the front ?? Too heavy in that run as it never picked up the front wheels once.
|
|
Bobo Husker
Silver Level
Joined: 28 Nov 2016
Location: Muscoda, WI
Points: 96
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2019 at 6:05pm |
|
I had 400 on front 200 on belly. Makes sence though. Think I need to find some 75lb weights. Thanks again!
|
|
