This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Early hd6g saved from the torch! |
Post Reply |
Author | |
ohio-d19
Bronze Level Joined: 10 Apr 2018 Location: Dover Points: 26 |
Post Options
Thanks(0)
Posted: 25 Nov 2018 at 6:23am |
I ran across a Facebook add that read " FREE SCRAP" .I was a one of many to look at it , some even offered money. But in the end the owner had a soft spot for one who could salvage parts. The clutch, bell housing, drive shaft and floorboard are gone. Undercarriage is about 90% or better except 1 rear roller we noticed was going bad.
|
|
not a mucanik I just pretend
|
|
Sponsored Links | |
truckerfarmer
Orange Level Access Joined: 26 Jan 2013 Location: Watertown, SD Points: 3184 |
Post Options
Thanks(0)
|
Nice save!
|
|
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41258 |
Post Options
Thanks(0)
|
Hmm- that is a lot of weight on a pickup - no matter the trailer .
has to be near capacity of trailer also as machine would go around 17,000 |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
ohio-d19
Bronze Level Joined: 10 Apr 2018 Location: Dover Points: 26 |
Post Options
Thanks(0)
|
Trailer is 24,000 gvw and ya it was probably a little much for the truck.but a few miles on back country roads it was just fine.it wasn't like I was doing 80mph on an interstate.
|
|
not a mucanik I just pretend
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29840 |
Post Options
Thanks(0)
|
Noticed the push tractor, been awhile since last ran?
|
|
ohio-d19
Bronze Level Joined: 10 Apr 2018 Location: Dover Points: 26 |
Post Options
Thanks(0)
|
DMiller, the bell housing clutch drive shaft and floor board are all missing and the present owner has not seen them on his newly acquired property. It is my assumption that it was taken apart to do a clutch job and the parts were stolen for scrap since it was about 100 ft from the road. I felt that it was still worth my time for the UC and the ripper/aux hydraulics to keep mine going for another 40 years. It appears that the engine is smaller than the one in my current 6g that I stuck new clutches in early this spring.
|
|
not a mucanik I just pretend
|
|
ohio-d19
Bronze Level Joined: 10 Apr 2018 Location: Dover Points: 26 |
Post Options
Thanks(0)
|
Hello all, is there a website database that I could use to decipher the year of my machines? Thanks
|
|
not a mucanik I just pretend
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |