| Author |
 Topic Search  Topic Options
|
Ted J 
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Auction Find
Posted: 03 Apr 2017 at 12:38pm |
I picked up this A-C (wagon OOPS!!) (Also have a wagon question) RAKE  at a recent auction. The owner had converted it from S/C to 3-point. As he was getting ready for the auction, he was moving his Cat and ran over part of the tongue. You can see that in the pics. TWO (2) BIG questions I need answered. Question 1: So I can get a manual..... *****I need to know what model it is.***** Question 2: So I can get it up and running...... *****What might be missing to put it back to S/C.***** Thanks Guys & Gals!    You can see the bent outward part of the tongue. I'm pretty sure I can straighten it out.  Can you see the bent piece in this pic?    The two lift arms I need to make over, these are junk, besides farmer weld.   Notice the piece at the bottom? Does it go to the rake? He had it in the pole shed and didn't know what it fit.
Edited by Ted J - 04 Apr 2017 at 9:22am
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
 |
|
Sponsored Links
|
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2372
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 1:28pm |
Thats a funny looking "wagon"  looks like a 77m
|
|
mdm1
Orange Level
Joined: 12 Sep 2009
Location: Onalaska, WI
Points: 2682
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 3:53pm |
|
Ted look at the pics closer. I don't see a wagon.
|
|
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!
|
|
Tim NH
Orange Level Access
Joined: 16 Oct 2012
Location: Lancaster NH
Points: 1125
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 4:14pm |
|
The piece at the bottom Ted, is the clutch pedal off a 47 Hudson. Just trying to be helpful. lol Tim
|
|
1950 WD 1959 D14 1955 WD45 1976 7000 B 207
|
|
tractorman
Orange Level
Joined: 22 Sep 2009
Location: west central wi
Points: 1046
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 4:29pm |
i am hung up on that thing in the background behind th red shed , its a what ?
|
|
Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 6:45pm |
|
|
|
Chad(WI)
Orange Level
Joined: 11 Sep 2009
Location: NE Wisconsin
Points: 958
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 7:18pm |
Agreed Ted. 77M 
|
|
Gary Burnett
Orange Level Access
Joined: 11 Sep 2009
Location: Virginia
Points: 3097
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 7:31pm |
|
My dad bought one of those one time we tried it with the snap couple hitch and then with 3pt hitch and it never did work right on our hilly ground.If you have flat even ground it might be OK.
|
|
AMB(wcIL)
Silver Level
Joined: 03 Oct 2009
Location: Chapin Il
Points: 316
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 7:58pm |
|
The bottom piece looks like a leveler arm off a AC lawn mower. Andy
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 54378
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2017 at 8:58pm |
Problem wif ALL lift type rakes is they lift when you don't want em to, and drag, when you don't want'm to...
|
|
Allis dave
Orange Level
Joined: 10 May 2012
Location: Northern IN
Points: 3073
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Apr 2017 at 7:57am |
Great find Ted. I always wanted to find one of those. Neat  Pictures got me thinking though. How do you adjust the height? Seems like there should've been a screw adjustment on the dolly wheels or something.
|
|
Ted J
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Apr 2017 at 9:25am |
 tractorman wrote:
i am hung up on that thing in the background behind th red shed , its a what ? |
John, it's my work horse...56 WD45
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|
Ted J
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Apr 2017 at 9:32am |
|
Anybody got a manual for it?
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|
Chad(WI)
Orange Level
Joined: 11 Sep 2009
Location: NE Wisconsin
Points: 958
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Apr 2017 at 9:49am |
|
I've got a spare manual Ted.
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Apr 2017 at 10:23am |
Allis dave wrote:
Great find Ted. I always wanted to find one of those. Neat
Pictures got me thinking though. How do you adjust the height? Seems like there should've been a screw adjustment on the dolly wheels or something. |
There are adjustments on the wheels.
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2017 at 2:00pm |
|
|
|
wfmurray
Orange Level
Joined: 13 Sep 2009
Location: Bostic NC
Points: 1225
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2017 at 2:46pm |
|
Got a suggestion . Put a chain like third link on three point and let it hinge where hitch fasten to rake. Then put a swivel dolly in front and let it float .
|
|
wfmurray
Orange Level
Joined: 13 Sep 2009
Location: Bostic NC
Points: 1225
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2017 at 2:51pm |
|
PS My idea was for the rake and not the wagon.
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2017 at 2:53pm |
|
Yeah, good idea WF. That might work. Dave
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 54378
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2017 at 6:27pm |
Re the snap coupler lift arms, drill a hole, in the shaft, under the lower jaws, parallel to the top bolt of the existing SC lift arms, of the tractor's SC clamps, and insert a 5/8 bolt or round stock, like a AC bush hog has, and the arms won't jump out of the coupler...
Hope that made sense...
|
|
Ted J
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Apr 2017 at 4:41pm |
DiyDave wrote:
Re the snap coupler lift arms, drill a hole, in the shaft, under the lower jaws, parallel to the top bolt of the existing SC lift arms, of the tractor's SC clamps, and insert a 5/8 bolt or round stock, like a AC bush hog has, and the arms won't jump out of the coupler...
Hope that made sense... |
Didn't help Dave as I've never seen a bush hog setup.... Thanks anyway, but do you have a pic?
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|
Ted J
Orange Level
Joined: 05 Jul 2010
Location: La Crosse, WI
Points: 18943
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Apr 2017 at 4:41pm |
After looking closely, there is a lot of damage to my front part of the rake. Here is what it looks like. The pictures don't do it justice..... Remember, it was run over by a CAT... The worst part is where the S/C Yoke is to hook in and the left & right sides are really bent all to heck. Notice the left (as you face it, facing rear) side has a bolt pulled completely away from the tongue part. Is the top parts supposed to be bent or straight? Any pics will help me. If you guys that have pics of my damaged area, can send them to me, it'd help. In this pic, you can see the two main rails, but you really can't tell how bent they are... Notice the welded on part for the top link. He had turned it into a 3-point conversion.  You can see how the left leg is bent outward and down! Parts pulled away and welds broken.  Down & out  Pulled the bolt right out (bent) and the makeshift tension holder.....What is it SUPPOSED to look like?  This is the left (as you face rear) main beam. Is it supposed to be curved? I KNOW not THIS much...  Are the bolts around the PTO / pulley supposed to be this long? Is something missing? Just above it is something with 2 holes, like a bolt or something should go through. See the add on ears for the top link of the 3-point.  That's about the best I can do with pics...... Anybody near me in La Crosse have one, so I can take a look at it? I probably need measurements also..... Thanks, Ted
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8731
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Apr 2017 at 4:58pm |
|
I bought a rake identical to that one a couple years ago. Finally got it home last fall over Thanksgiving weekend. I haven't tried using it yet. There is another one just like it listed for sale on craigslist; either western MT, or eastern Idaho. Darrel
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8731
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Apr 2017 at 5:01pm |
Chad(WI) wrote:
Agreed Ted. 77MWhat a beautiful tractor and rake you have there, Chad. Got enough weight on the tractor that the wind shouldn't blow it away. Lol! Darrel |
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2017 at 10:18am |
Ted, here is a picture of the front of my rake. Hope it helps with some of your questions. I don't have those four bolts you reference. I kind of suspect there may have been some sort of pto cover bolted on there, maybe? Can't tell from the picture about the other two holes, so will have to go out and take a look at the rake. The jack had been broke off of my rake when I acquired it, but did manage to find it in the seller's shed and then welded a bracket onto the rake to bolt the jack to. Dave 
|
|
Dave (NE)
Orange Level
Joined: 12 Sep 2009
Location: Eagle Nebraska
Points: 2157
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2017 at 10:42am |
|
Ok, Ted, went back out and looked at my rake. The two holes you reference had a pin going through them to the bracket the idler/tightening pulley connects to. On your rake it looks like that pulley was moved to the left (as you face the rake) and a fabricated piece welded on for the pulley bracket, so I guess you have it taken care of. Hope this helps. Dave
|
|
