| Author |
 Topic Search  Topic Options
|
clarkscreek 
Bronze Level Access
Joined: 04 Mar 2017
Location: kentucky
Points: 137
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 200 allis pto
Posted: 04 Mar 2017 at 6:48pm |
|
Just bought my first allis after being a lifelong deere man, needed a 90hp tractor and couldn't bring myself to pay what a decent 4020 brings. My question is, it has hydraulic pto and it stays on. when I move the lever it is moving the valve but I don't feel anything happening, like no notches or anything. is it supposed to feel like this, should I feel the different locations like on and off.
|
 |
|
Sponsored Links
|
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Mar 2017 at 9:40pm |
|
There should be three poisons, on off brake. Pin shears in lever some times. MACK
|
|
DanWi
Orange Level Access
Joined: 18 Sep 2009
Location: wttn
Points: 1900
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Mar 2017 at 10:02pm |
|
The pto will creep in the off position when it is cold and the brake is wore out. Have you tried it warmed up with something hooked to the pto. Shut the tractor off hook up pto and see if it stops then. If it doesn't then a valve problem also at that point see if pto slips or brings pto up to speed as it should when turned on.
|
|
clarkscreek
Bronze Level Access
Joined: 04 Mar 2017
Location: kentucky
Points: 137
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Mar 2017 at 7:42am |
|
Thanks guys I'll get it checked out Tuesday.
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8688
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Mar 2017 at 8:45am |
|
Good luck with the 200!!!!!Darrel
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21397
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Mar 2017 at 12:43pm |
|
The console lever itself has 3 detents in it, if working correctly. Ball and spring inside console.
|
|
clarkscreek
Bronze Level Access
Joined: 04 Mar 2017
Location: kentucky
Points: 137
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Mar 2017 at 11:33pm |
|
Finally got to work on the tractor. You guys were right ball was missing for the detent. PTO does what it should except for the brake part. It seems to pull pretty good even with it off. It won't start a load off but it will keep one coasting after you turn it off. Will there be less pull when the oil gets warm or will it stay the same.
|
|
DanWi
Orange Level Access
Joined: 18 Sep 2009
Location: wttn
Points: 1900
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Mar 2017 at 10:47am |
|
When the oil is warm it should stop . If I hook up the manure spreader or feed grinder on a cold day I have to turn the tractor off to hook up the pto then when I start the tractor it will turn for a few minutes or when I hook up to the spreader I don't hook up the pto till I fill the spreader, by then it will stop.
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8255
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Mar 2017 at 5:09pm |
|
They have a BRAKE detention, if the brake pad is good it will stop it and hold,,
|
|
