| Author |
 Topic Search  Topic Options
|
Beirnesy 
Orange Level
Joined: 30 Jun 2012
Location: Mid Western Ont
Points: 351
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Murphy Rockers
Posted: 26 Jan 2017 at 11:15pm |
Anyone on here using Murphy roller tip rockers?
|
|
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716
|
 |
|
Sponsored Links
|
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 4972
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2017 at 8:17am |
|
yep, very nice! Just need to put good push-rods in too, since the more aggressive valve opening will bend stock ones eventually. Obviously, you need to make sure you have adequate valve reliefs in the pistons, since these rockers will add quite a bit of valve lift to an engine that's already close to hitting.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2017 at 8:38am |
Ive used a set, could feel the extra power, bent 3 push rods second pull, going to buy another set!
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
d17brown
Orange Level
Joined: 11 Sep 2009
Location: farley iowa
Points: 1698
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2017 at 7:12pm |
|
who sells the heavy push rods and how much are they
|
|
phil
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 4972
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2017 at 9:39am |
|
I keep them in stock for 301 and 426 from smith brothers. The set of 12 is 276.00. You can order them right from them, but you have to tell them what to build, and that's where I did the leg work, plus I keep them on my shelf. I have them in the stock diameter, so clearance isn't an issue. They are very strong, made of a better material, and thicker wall.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
bsallis180
Silver Level
Joined: 29 Jul 2013
Location: Pennsylvania
Points: 209
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2017 at 9:41am |
smith bros. copy past link http://www.pushrods.net/pushrods.html
|
|
d17brown
Orange Level
Joined: 11 Sep 2009
Location: farley iowa
Points: 1698
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2017 at 7:24pm |
|
do you have push rods for 226 d17
|
|
phil
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 4972
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jan 2017 at 7:52am |
|
Smith bros will make what ever you want, you just have to know how to measure every dimension they need. And if you tell them wrong, you just bought a set of paperweights. I only keep 301/426.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
wi50
Orange Level
Joined: 24 Sep 2010
Location: weegieland
Points: 1010
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jan 2017 at 1:12pm |
|
If you want Phil, I probably have a set of push rods from a Perkins that are real close to the Allis 201-226 ones, you can just cut and grind the end to fit. I used them to make custom length ones for my old engine and I probably have morein a box
|
|
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
|
mgburchard
Orange Level
Joined: 14 Sep 2009
Location: Tennessee
Points: 1123
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 5:41pm |
|
Phil have a set of the wc pushrods I prefer the stamped ones with the oval o on side cause they are lighter but the WC ones don't bend as easy
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 52591
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 6:02pm |
What does panky prefer??? 
|
|
mgburchard
Orange Level
Joined: 14 Sep 2009
Location: Tennessee
Points: 1123
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Feb 2017 at 7:12pm |
|
Dave Mitch is liking 4-7 swap cams for bigblock Chevy's currently .
|
|
