I was able to get the drag chain (from cylinder to sieves) freed up tonight. I thought that I was going to have to take the throat off of it to fix it, but there was a cleanout plate under the throat that I noticed and I took it off and had easy access to the chain. After a little work it came loose. I also was able to free up the beater in front of the cylinder and now it spins very easy.
Next on the fix list is:
#1 Return clean grain elevator to factory position (it has the kit added to make it longer for extensions - I was told extensions were very hard on the axles on these so I took them off. If I were to add just one 1x8 extension around the bin would I have any problems?
#2 New hose for variable speed. What pressure does this hose run? Could I just use 1/2-5/8 copper tubing for this?
#3 Put the 330 head on and install the gathering snouts.
#4 Need to adjust the chains and oil them up real good.
#5 Need to install the set of rice tires I picked up (front and back) for $100. The old tires and rims are going on my WD45
#6 fix the lights and electrical system.
#7 clean and repair fuel tank
After looking at the list I know feel overwhelmed LOL!! Oh well some of it will go fast while the rest will take a little while.
Adam
Topic Options
Post Options
Thanks(0)
