| Author |
 Topic Search  Topic Options
|
NEVER green 
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 426 camshaft
Posted: 19 Mar 2015 at 8:40am |
Just had my 426 camshaft reground for higher lift and longer duration by Colt cams. This was his first performance Allis cam. For all you pullers out there the exhaust side is very inefficient, bad lift and duration. He said intake was little better. By improving the exh it will spool up turbo much better. Since Colt put lot of development in cam he's looking for more business.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
 |
|
Sponsored Links
|
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Mar 2015 at 9:05am |
|
How much was the regrind?
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
AC 7060
Bronze Level
Joined: 06 Jul 2010
Points: 144
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Mar 2015 at 10:48am |
|
I also might be interested in a cam how much and what rpm range is it designed for
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Mar 2015 at 4:16pm |
|
375.00 for regrind, 108.00 for resurfacing 12 tappets. The cam is for 3000-4000 rpms. If you go to Colt cams web sight there is little more info.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Mar 2015 at 10:30am |
|
I would suppose you have to cut the pistons for valve clearance? Correct?or?
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Mar 2015 at 8:10am |
|
Not sure about clearance, didnt go with huge lift to keep lugging ability, but Im going to check with playdo any way.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Mar 2015 at 8:17am |
|
Yeah I'd be really interested in seeing if it clears. I wonder if he could go alittle milder on profile for a farm/pulling tractor. Hmmmm...
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Mar 2015 at 8:34am |
|
You could call him, very nice informative guy.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 May 2015 at 7:16am |
|
Any update on this? Just curious.
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 May 2015 at 8:03am |
|
It is more than just lift that affects the piston to valve clearance. Durations and event timing have to be considered. If the reground cam has more duration and more lift than a stock cam I would guess you will need to machine the pistons for clearance. There wasn't much room with a factory cam in it.
Edited by O.P.S. Heads - 21 May 2015 at 8:03am
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 May 2015 at 8:44am |
Stupid farming, planting done, still picking rocks, in process of removing front of engine, will let you know. Soon???????
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8192
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 May 2015 at 8:13am |
|
I always wondered how you get a 301 diesel to run good at 3000 rpm limits , I kno they run real good at 4500 rpm,s ; someone told me get the cam reground- cheap power
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 May 2015 at 4:45pm |
 NEVER green wrote:
Stupid farming, planting done, still picking rocks, in process of removing front of engine, will let you know. Soon??????? |
Still not done picking rocks, but I did check those clearances. Intake at 090, Ex at 045, I noticed when I set the lash sure had tighten up the Ex lots more. Ive read for 6000 rpm motor clearance should be 080, would 060 work for 4000 rpm motor, thoughts?
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 May 2015 at 4:47pm |
O.P.S. Heads wrote:
It is more than just lift that affects the piston to valve clearance. Durations and event timing have to be considered. If the reground cam has more duration and more lift than a stock cam I would guess you will need to machine the pistons for clearance. There wasn't much room with a factory cam in it. |
Yes duration was increased, especially Ex.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Aug 2015 at 8:24am |
|
Any updates?
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
moblie120
Bronze Level
Joined: 25 Aug 2015
Location: shanghai
Points: 2
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Aug 2015 at 2:19am |
This was his first performance Allis cam. For all you pullers out there
the exhaust side is very inefficient, bad lift and duration. meizu m2 note
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Sep 2015 at 8:25am |
peterson wrote:
Any updates? |
Whats the deal with machinists?, are they all slow? Still waiting on my heads and block.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jan 2016 at 5:20pm |
Anything yet? 
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
tbran
Orange Level
Joined: 14 Sep 2009
Location: Paris Tn
Points: 3397
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jan 2016 at 10:52pm |
|
IT would be neat for a cam mfg / grinder to do baseline tests with the old stock cam designed in the 60s for a naturally aspirated engine as in the 3400 and 2800 engines to see what the difference if any would be with a modern grind in the field use engines. If the change is significant, what a business one might have...
|
|
When told "it's not the money,it's the principle", remember, it's always the money..
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2016 at 6:51am |
|
I think there would be a nice gain in the torque of the engine, plus run cooler too!
Edited by peterson - 09 Jan 2016 at 7:37am
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7910
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2016 at 4:17pm |
peterson wrote:
Anything yet? |
Sigh, machinists latest is a death in his family, cant complain to him about that. Hope to have it running by spring????
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Big Orange
Silver Level
Joined: 11 Sep 2009
Points: 313
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jan 2016 at 1:31pm |
|
A cam. grinding co. spec. is one thing, but the timing of the cam. in your engine,is another thing. The tolerances of the key ways in crank gears and cams gears, even the key slots in the crank & cam has an effect on timing. In my experience I have found the timing to very as much as 7 degrees, even on stock engines. That will make a lot of difference in the way an engine performs. So check the timing to make sure it's to spec. or advance it to gain low rpm power, retard for high rpm power. But always check the valve to piston Clarence.
|
|
Big Orange
Silver Level
Joined: 11 Sep 2009
Points: 313
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jan 2016 at 5:43pm |
|
You may be able to gain what you need by advancing the stock cam, about 8 degrees with offset key & installing stiffer valve springs, most importantly 1.75:1 rocker arms, as the stock rocker arms are 1.48:1 + stronger pushrods. But be sure to check the valve to piston clearance. The rocket arms & pushrods can be bought from Murphy's Machine in Hallsville Mo. 573 696 3655 or Kenney's Pulling parts 606 379 7490
|
|
CalSnider
Bronze Level
Joined: 24 Jan 2016
Location: Wisconsin
Points: 1
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2016 at 8:48am |
|
is there anyone in the midwest that can grind a 426 cam shaft?
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2016 at 10:14am |
|
No limit manufacturing in Marshfield wi
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
Peterson
Orange Level
Joined: 05 Mar 2011
Location: Westboro, Wi
Points: 862
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Sep 2016 at 3:25pm |
|
Hate to be the one always asking, but any update?
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
ac720nut
Orange Level
Joined: 09 Feb 2016
Location: Dexter Mi
Points: 1217
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2016 at 8:07pm |
|
Peterson, how's your ride coming? Lost track of your thread.
|
|
