| Author |
 Topic Search  Topic Options
|
Robacpuller 
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: starter issues
Posted: 22 May 2016 at 8:44pm |
|
What is a good starter to use on a 400 cube wc. I have a gear reduction starter on know and 2 12 volt batteries. It has all it can do to start my tractor. I know people use a diesel starter off a 45 diesel. I run 11to 1 compression.
|
 |
|
Sponsored Links
|
|
|
patrickmull
Orange Level
Joined: 11 Jan 2011
Location: Casey IL
Points: 893
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 May 2016 at 9:14pm |
|
I fixed mine by running A ground direct to the starter use 2/0 cable
|
|
allispuller
Bronze Level
Joined: 12 Nov 2012
Location: illinois
Points: 192
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 May 2016 at 10:35pm |
|
Get a starter from hi torque imi out of California gonna run ya around 600 bucks but it'll start it
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20548
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 May 2016 at 5:27am |
|
How did I ever get by with a standard WD45 gas starter with the center armature bushing???? I had good welding cables for pos and neg to the starter, one 850 CCA battery and 390 cubes at 12 to 1 compression. Ran this way for several years without any issues.
|
|
patrickmull
Orange Level
Joined: 11 Jan 2011
Location: Casey IL
Points: 893
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 May 2016 at 5:33am |
|
I also put a ignition switch on mine I get it rolling over then hit the switch
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 11823
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 May 2016 at 7:35am |
|
Rob,
I can build a pretty stout Starter motor from a Delco core if you have one to fit your WC. Usually runs around $475. or so if interested. I've done bout' a dozen of em' so far for our pulling customer's and everyone has been more than satisfied...
Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 May 2016 at 7:17pm |
|
I also have batteries up front does it Make a difference having them closer to starter. Or just bigger cables and ground to starter
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 11823
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 May 2016 at 2:20pm |
|
Its always a good practice to have your power source as close as possible. If you have to keep them up front, run cable the size of sewer pipe to cut down on voltage drop....
Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 May 2016 at 8:04pm |
|
Patrick what size tires do u use on your tractor and rpms in open class. What do u have for cubes. How much hp. I have 400 cubes tried Dino and broke drop box. I was at 0ver 90 when broke. U have awesome looking tractor. What tire size. I have 15.5 38.
|
|
patrickmull
Orange Level
Joined: 11 Jan 2011
Location: Casey IL
Points: 893
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 May 2016 at 8:02pm |
|
I have 15.5x38 Its 350 ci don't know the exact HP I run close to 2950 in the open class
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22487
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 May 2016 at 8:11pm |
|
re:
run cable the size of sewer pipe to cut down on voltage drop....
Steve@B&B
That's GREAT Steve ! LOL, you mean I can't pull 500 AMPS through 20 feet of #18 wire ??
Sad thing is I KNOW someone who used 3/8 copper 'bussbar' for his battery feeds pushed it through 5/8 black rubber garden hose to insulate it. It was pretty and no voltage drop either !!
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 May 2016 at 9:22pm |
|
How do get it to run that high rpms,what Gove spring do u use
|
|
patrickmull
Orange Level
Joined: 11 Jan 2011
Location: Casey IL
Points: 893
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 May 2016 at 9:40am |
|
I use a 170 spring worked on the weights and the throttle rods I made a spring adjuster and a adjustable rod on the carb side the carb head and manifold has had a lot of work done to it
|
|
