| Author |
 Topic Search  Topic Options
|
Larrywdin 
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WD and WD45 brake pin removal (new pictures posted
Posted: 19 Apr 2012 at 10:22pm |
Well,,my Pin puller came today from the machine shop, so I go out and try my luck at pulling a brake pin. Alot of PB blaster, and apply the tool, I ran it down until it wouldn't move, using a small ball pein hammer I start tapping the middle of the pin and outer housing,,,and I see my new tool relax,,I think,,OK,,I've pulled the head off the pin,,remove the tool?,,and,, It MOVED!!!!,,knowing now,,I've got'er made, I just took my time,put tension on the tool,,and kept tapping the pin rather hard, each time seeing the tool relax, next thing I see, is the end of the pin coming through! So now I KNOW I'm home free, so keep up with the PB Blaster, and tapping, and a 1/4 turn on the tool And out she came!, The whole process took me roughly 1 hour, NOT getting in a hurry, and just letting the vibration of the hammer, and tension on the pin do it's thing. Did not damage the head of the pin amazingly, FULLY expected that!,,I've heard stories,, but after wiping the pin off, it looks like the outer part of the pin is where she REALLY gets rusty ,,,,NOW,,,the BIG question,,1 more to go,,can I do it again?,,THEN,,I have my WD to do,,,could I BE so lucky???!!!
Edited by Larrywdin - 27 Apr 2012 at 12:35am
|
 |
|
Sponsored Links
|
|
|
b170dr
Bronze Level
Joined: 05 Feb 2012
Location: Gays Mills Wi
Points: 46
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2012 at 10:34pm |
|
Larry did you dream this tool up, or is it a tool you purcased. It looks like the peach to have in the tool chest. Roger
|
|
'64 B-10, '58 D-14, '60 D-15D, '58 D-17D, D-19, 170, 2-185D, 190, 68 D-21 11, 72-220, 7000,7030, F-2 G,w/5 Heads,L-2 G, 330 No-Till
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8261
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2012 at 10:36pm |
|
Win some,loose some.You ain't done yet! Good luck!
|
|
wjohn
Orange Level
Joined: 19 Jan 2010
Location: KS
Points: 2004
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2012 at 10:36pm |
|
Thank you for the excellent pictures. Dad's WD needs brakes, and I've been stalling so far. He says he just drops the loader if he has to stop, and so far he's content with that. I'll definitely buy that tool when I have a go at them. Good luck with the rest of the pins!
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2012 at 10:46pm |
WJohn, and B170dr, http://www.agrimsontool.com/index.htmThis is the place that has them on the shelf!,$175.00,,and money WELL spent! BUT, from what I've learned from guys here on the forum,,BE CAREFUL!,,cause this bad boy WILL pull the head RIGHT off the pin! Like I said, I just cranked her down fairly tight, didn't "jump up and down" on it, then took a 8 oz ball pein hammer, and knocked the crap outa the middle of the pin and kept squirting PB Blaster on it!
Edited by Larrywdin - 19 Apr 2012 at 10:47pm
|
|
John (C-IL)
Orange Level
Joined: 11 Sep 2009
Location: Illinois
Points: 1654
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2012 at 6:36am |
|
Larry, a small tip. I know it sounds counterproductive, but once you get it out 3/8 or so, lube it up and drive it back in. The rest of the extraction will go smoother. Ya dun good and were patient doing the job, that is the key.
Edited by John (C-IL) - 20 Apr 2012 at 6:37am
|
|
B26240
Orange Level
Joined: 21 Nov 2009
Location: mn
Points: 3860
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2012 at 7:28am |
|
Larry great pic's ! thanks for posting. When you re-assemble clean the pin using wire wheel and then coat with anti seize not that you will ever take it out again but still the right thin to do I think. In the first pic it looks like you were able to get the brke rods out ok I have twisted the threaded end of those off but not as big an issue to deal with as those pins. In my opinion a brake job on these tractors is the hardest thing to do!
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2012 at 9:02am |
Thanks for the encouragement guys! I'm thinking on putting stainless steel pins back in. will get the stock metal here localy and turn them out on the lathe at work.
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22823
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2012 at 12:59pm |
All this talk about stuck pins makes em think I might be the only guy that ever had a brake pin fall out. My B's left brake just quit all of a sudden last year and I found the pin almost all the way out. I put a bolt back in cause the pin is too loose 
|
|
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2012 at 2:42pm |
CTucker! HA HA HA,,Dale Haymaker says ever now and then you'll find one that'll come right out. But from my understanding, that is the exception to the rule usually,,but I AM still learning here! I don't have NEAR the experance most have on here in the repair arena on AC stuff!
|
|
allismanamp
Orange Level
Joined: 15 Oct 2011
Location: MN
Points: 665
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2012 at 12:59pm |
|
after doing those brakes on the neighbors tractor i added to the periodic maintenance chart and i quote. rotate pin with a vise grip and give them a shot of the good stuff at least at the beginning of each season and have mercy on the next fella that owns the tractor 50 years from now
|
|
~AMP~
|
|
allismanamp
Orange Level
Joined: 15 Oct 2011
Location: MN
Points: 665
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2012 at 1:05pm |
|
is that tool specific for that diameter shaft or can it be tightened down all the way to say a 1/4 inch shaft if so that would be really really really helpful when trying to fix some twisted off broken stuck old rusted buggers that like a good fight to come apart and that is the theme it seems on the stuff people bring me
|
|
~AMP~
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2012 at 2:17pm |
Allismanamp, it is just made for this application. It's two halves that clamp around the end of the shaft and lock into that groove,
Edited by Larrywdin - 26 Apr 2012 at 11:50pm
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2012 at 12:03am |
Got the second pin out tonight with the same method as mentioned above and without any tore up parts, now comes the REAL challenge, pulling the pins on my WD, hope my luck streak isn't over!
|
|
Jeff(WD45-SATX-TN)
Orange Level
Joined: 13 Sep 2009
Location: Sewanee, TN
Points: 443
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2012 at 3:44pm |
Your on a roll. Do not get over confident.....take your time. I was lucky, both of mine came out with a little soaking and about an hours worth of pulling.
Continued success to you!
|
|
1954 WD45 NF "Iron Tater"
|
|
AC WD45
Orange Level
Joined: 28 Sep 2009
Location: Mid Michigan
Points: 2017
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2012 at 6:36pm |
|
That's a heater cab bracket, I see it now.
|
|
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193
|
|
Stan R
Orange Level Access
Joined: 03 Dec 2009
Location: MA
Points: 960
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2012 at 6:59pm |
|
Stainless steel galls. I wouldn't use it.
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2012 at 11:22pm |
SUCCESS!!!!!!!,,pulled the hitch and brackets off to make it easier to get to the pin holes. just kept tension on the pins, and tapped them with the hammer in the opening where you can see the pins, the lower pin in the picture was on the right side, and it came out easy,almost scary, thought for sure I'd pulled the head off, but the puller stayed on the tractor, so I just stayed with it. the pin in the top pf the picture, wasn't so nice,It put up a pretty good fight, but I won! now I've got to clean out the holes good, but I can start on the BIG project, replace the transmission gears!
Edited by Larrywdin - 26 Apr 2012 at 11:24pm
|
|
Jim Lindemood
Orange Level
Joined: 22 Sep 2009
Location: Dry Ridge, KY
Points: 2569
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2012 at 6:57am |
|
Don't ya just love it when things go right? The converse is also true -- LOL
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2012 at 7:29am |
YEAH Jim!,but I believe the hard part IS behind me now! I could be wrong though,,,,
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2012 at 10:52pm |
I see new brake pads on E-Bay with rivets for somewhere around $15.00 to $18.00,,,any one know if they're any good? Or should I get them from some where else?
|
|
TedBuiskerN.IL.
Orange Level
Joined: 11 Sep 2009
Location: Davis, IL.
Points: 1959
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 9:09am |
The first one I ever did was years ago, rocked the pin back and forth with a vice grips, put a big screwdriver in the pin undercut, and they came right out. No such luck with the WD I have in the shop now. Have an Agrimson tool on the way. LOL
|
|
Most problems can be solved with the proper application of high explosives.
|
|
Flint23
Orange Level
Joined: 31 Jan 2011
Location: New Haven In
Points: 429
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 12:55pm |
|
That tool is a little salty but if you price out the pins it evens out, plus if you do more than one brake job it's paid for itself.. Great pics of the tool in action Larry.
|
|
been there done that, not doing it again...
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2012 at 3:03pm |
Ted!, you'll LOVE that tool! it worked GREAT for me! Thanks Flint!
Edited by Larrywdin - 29 Apr 2012 at 3:03pm
|
|
Dusty MI
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5058
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2012 at 5:01pm |
I would think an impact wrench would work well with that pin puller.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
Larrywdin
Silver Level
Joined: 17 Apr 2012
Location: Indiana
Points: 105
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2012 at 6:00pm |
Dusty, two things about that, the first and BIG one is, there's no room to get an impact in between the final drive and the tool, (I thought that too though before I got the tool and tried it)
The second thing is, if you COULD get one in there, you'd probably break the head off the pin with the effort the impact would put on it!,,caution is the key there to successful pit romval is what I found!
|
|
