D-14/15 WD tire question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hey all,

I have a question about the bolt spacing on the rear axel of my D14.  I assume the bolt spacing is the same as a D15 but does it match the WD series or D17 series?  I'd like to buy some newer tires for my D14 and I see WD Rear tires all the time, I was wondering if they would just bolt right on or if the bolt spacing wouldn't match.  Also, while we're on it, do the snap coupler spring packs and bell housings match?  Could they be swapped between a D14/15, WD or a D17?  My D14 snap coupler spring pack housing was broke sometime in the past and welded back together.  I'm also missing the release lever, there's a jerry rigged chain there now that kinda works but i'm trying to get all the parts put back to what they should be.  Has anyone ever gone through and compared a WD series and a D14/15 series to see what could be swapped between the two?  I see WD's fairly often and was wondering if picking up a donor for my D14 would make sense.  My D14 was used pretty hard and just cobbled back together to keep it running.  I'm slowly putting it back to the condition it should be in and just lurking here has been a huge help, thanks for any advice you all could give.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Joe7077 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Sep 2011 Location: Green Bay, Wi. Points: 26	Post Options Post Reply Quote Joe7077 Report Post Thanks(0) Quote Reply Topic: D-14/15 WD tire question Posted: 10 Feb 2012 at 8:43am
	Hey all, I have a question about the bolt spacing on the rear axel of my D14. I assume the bolt spacing is the same as a D15 but does it match the WD series or D17 series? I'd like to buy some newer tires for my D14 and I see WD Rear tires all the time, I was wondering if they would just bolt right on or if the bolt spacing wouldn't match. Also, while we're on it, do the snap coupler spring packs and bell housings match? Could they be swapped between a D14/15, WD or a D17? My D14 snap coupler spring pack housing was broke sometime in the past and welded back together. I'm also missing the release lever, there's a jerry rigged chain there now that kinda works but i'm trying to get all the parts put back to what they should be. Has anyone ever gone through and compared a WD series and a D14/15 series to see what could be swapped between the two? I see WD's fairly often and was wondering if picking up a donor for my D14 would make sense. My D14 was used pretty hard and just cobbled back together to keep it running. I'm slowly putting it back to the condition it should be in and just lurking here has been a huge help, thanks for any advice you all could give.

Sponsored Links

HagerAC Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2010 Location: SE MN Points: 1195	Post Options Post Reply Quote HagerAC Report Post Thanks(0) Quote Reply Posted: 10 Feb 2012 at 9:06am
	The 28 inch WD or D-17 wheels will bolt right up to a D-14.
	30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

jaybmiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 24696	Post Options Post Reply Quote jaybmiller Report Post Thanks(0) Quote Reply Posted: 10 Feb 2012 at 9:14am
	Also 26" combine rims/tires fit as well ! Try local yards ,especially after a 'combine derby'. I got a pair,50% tread, for $100.
	3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water

Eldon (WA) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Spokane, WA Points: 7765	Post Options Post Reply Quote Eldon (WA) Report Post Thanks(0) Quote Reply Posted: 10 Feb 2012 at 10:09am
	The wheels will bolt up, but if you try to spin them all the way in they will hit the fenders. You can get spacers to set them out, but they are hard to find and rather expensive. Make sure you use rail stops! Here is what the factory 28" option included. Edited by Eldon (WA) - 10 Feb 2012 at 10:24am
	ALLIS EXPRESS! This year:

Joe7077 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Sep 2011 Location: Green Bay, Wi. Points: 26	Post Options Post Reply Quote Joe7077 Report Post Thanks(0) Quote Reply Posted: 10 Feb 2012 at 12:57pm
	Thanks for the info and the picture. Anyone know about the snap coupler assemblies matching across the product lines?