7060 exhaust manifold

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Forum Home > Allis Chalmers > Farm Equipment

New Posts

FAQ

Author

Message

Topic Search

Topic Options

dualquads

Bronze Level

Joined: 12 Dec 2010
Location: Ill Annoy
Points: 51

Post Options

Post Reply

Quote dualquads

Report Post

Thanks(0)

Quote

Topic: 7060 exhaust manifold
Posted: 08 May 2011 at 8:53pm

I have cracked center manifold on my 7060. Tried today to get the bolts out with a socket and flex-handle. Very tight to the point of afraid of breaking them. Any tips on how to get these things loose? Thought about using a heavy air impact wrench but it's at the other farm and I didn't have much time today. Thank you for any help.

Sponsored Links

Steve M C/IL View Drop Down

Orange Level

Joined: 01 Jul 2010
Location: shelbyville IL
Points: 691

Post Options

Post Reply

Quote Steve M C/IL

Report Post

Thanks(0)

Quote

Posted: 08 May 2011 at 9:20pm

Soak with favorite pentrant.Get a large drift/punch of some kind,set against the head and give it a good whack with a 3-4lb hammer.Your probably stuck at the bolt to manifold joint as much as anything. They only torque around 65ft/lb.

armandjones82 View Drop Down

Bronze Level

Joined: 07 Dec 2010
Location: Missouri
Points: 22

Post Options

Post Reply

Quote armandjones82

Report Post

Thanks(0)

Quote

Posted: 14 May 2011 at 5:07am

dualquads wrote:

I have cracked center exhaust manifold on my 7060. Tried today to get the bolts out with a socket and flex-handle. Very tight to the point of afraid of breaking them. Any tips on how to get these things loose? Thought about using a heavy air impact wrench but it's at the other farm and I didn't have much time today. Thank you for any help.

A regular ratchet would not apply enough torque so I've used a breaker bar to get mine loose.. A loud pop type sound would come out when their already loose..