Allis loader seal kits?

Hello,

I need the outer seal (dustcap?) for two cylinders on our Allis loaders, one of the loaders in on a 160 and one is on a 180 and they use the same seal. I've already looked on the Agco parts site and none of the pictures I can find seem to match what I need and the local dealer isn't too knowledgeable and can't gaureentee that I will get the right parts if I order what they think I need. If anyone needs a picture for clarification let me know and I'll get one posted.

Does anyone have the part number for the seals or a source outside of Agco to buy them?

Thanks,

Erik

Hi Bill,

Is the end nut itself still available? If possible I would like to get two of the nuts along with the wiper seals as the ones in the cylinders now are really beat up from "farmer fixes" over the years.

I've already opened up the cylinders and replaced the O-rings so the leak has been fixed, I'd just like to replace the outer wiper seals and ideally the end nuts if possible.

Thanks,

Erik

Bill, what does a new lower lift ram cost for the 500 loader?  Like you said, if it is leaking at the seal, there are other problems.  One of my lift rams leaks bad.  Or, does a guy have to purchase the whole cylinder to go back to square one?

Baum Hydraulics probably also has those seal kits.

Gerald J.

500 lift ram is 44 1/2" retracted length, complete new are still available for $870.00, new rod and bearing, $280.00. We have a  used ram on consignement from a customer $285.00, may need seals.  Thanks, Bill @ S.LI.