This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
AC dozer on Craigs list. What is it? |
Post Reply |
Author | |
BruceWA
Bronze Level Joined: 11 Sep 2009 Location: Kent WA Points: 18 |
Post Options
Thanks(0)
Posted: 18 Oct 2009 at 8:44pm |
This dozer is advertised locally but they don't mention the model. Can anyone tell from the pictures in the link?
|
|
Sponsored Links | |
Dnoym N. S. Can.
Orange Level Access Joined: 03 Oct 2009 Points: 544 |
Post Options
Thanks(0)
|
look to be a big one
Allis Chalmers 6 way dozermy guess at 60 hp would be61 hp; ALLIS-CHALMERS HD6 DOZER hth B:-) Dnoym |
|
JoeO(CMO)
Orange Level Joined: 11 Sep 2009 Location: Cent Missouri Points: 2694 |
Post Options
Thanks(0)
|
looks like 653 on the decal, replaces the HD4, with improvements.
I wish it were closer, I'm in the market for one to clean up on the farm.
Edited by JoeO(CMO) - 18 Oct 2009 at 9:04pm |
|
BruceWA
Bronze Level Joined: 11 Sep 2009 Location: Kent WA Points: 18 |
Post Options
Thanks(0)
|
Do they have wet or dry steering clutches and brakes? How much do they weigh?
Edited by BruceWA - 18 Oct 2009 at 9:28pm |
|
Tracy Martin TN
Orange Level Access Joined: 11 Sep 2009 Location: Gallatin,TN Points: 10624 |
Post Options
Thanks(0)
|
Dry brakes and clutches. Great little machine. That one has original UNI-Tool cage on it. Heavy blade also.Tracy Martin
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41572 |
Post Options
Thanks(0)
|
653 was upgrade of the H4 and like the 655, still a industrial machine . As far as I know aboutthe same as the HD4 , does have winch and 6 way blade.
Price isnt bad but would wonder as machine is older unit.
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
BruceWA
Bronze Level Joined: 11 Sep 2009 Location: Kent WA Points: 18 |
Post Options
Thanks(0)
|
Had a 500 IH years back. Very handy little machine to operate but the dry clutches and brakes would rust when you didn't use it and it seemed like they always needed some kind of adjustment. I got real good at pulling the brake drum and clutch out. Do these give the same type of trouble and can you pull the brake out from under the seat?
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41572 |
Post Options
Thanks(0)
|
Not to bad to work on but no reason for the brakes or clutch to rust. Have a large cleanout hole in bottom of case 2" pipe plug. In 10 years had no clutch problems with the HD4 I had . Only problem is learning how to slide the drive axel into ring gear shaft without loosing it. Getting the clip to release , but with books it is easy .
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
jrjuday
Bronze Level Joined: 12 Sep 2009 Location: n.e. indiana Points: 119 |
Post Options
Thanks(0)
|
That is a great price if it is what he says it is. I paid more than that for my HD-4 10 years ago and the winch didn't work when I bought it. The HD-4 and 653 are basically the same machine save for a few more HP on the 653 and an improved undercarriage.....more links, pads, and the center guide roller is flipped around facing the inside, toward the machine. Parts are still available through MinnPar dealers or can be had on their site. Some stuff can be bought at Agco dealers too.....mostly just the engine components as it has the 200cid engine. Just the winch, if it works and needs no work, should be worth 1500 to 2000 alone. 60hp is more than enough power for a 6 ton machine and I have pushed and pulled a lot of stuff that I shouldn't have. Steering clutches are dry type and pretty straight forward. Having the radiator sit right in front of the operator is kinda strange but it is nice having it out of the way of debris. If you are close and have the money and the need for a small dozer you had better snatch it up. He is right on with his price. JJuday
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |