This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D17 Series II spark plug confirmation |
Post Reply |
Author | |
EPALLIS
Orange Level Joined: 12 Sep 2009 Location: Illinois Points: 1137 |
Post Options
Thanks(0)
Posted: 21 Apr 2024 at 9:09pm |
Hi: Just need a confirmation that I'm treating this 60-year-old A-C girl correctly. On a D17 Series II, the original owner's manual says to use AC Delco 45XL spark plugs. I understand these are no longer made. I then went to the cross-reference conversion chart, and it said today that I should be using Autolight 405 in the Allis Chalmers D17 Series II. Does that sound correct? Thanks in advance for any assistance. Appreciate it!
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20548 |
Post Options
Thanks(0)
|
R-45 XL or R-45 XLS
|
|
Don Jr NY
Silver Level Joined: 11 Sep 2009 Location: Waterloo NY Points: 339 |
Post Options
Thanks(0)
|
Our "unofficial" series II is a 1961 and uses the long reach plugs. Ours has Champion RN11YC in it. I thought only the series I used the short reach plugs like the AC 45's but I'm not sure of the serial number break between the two. Don Jr.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20548 |
Post Options
Thanks(0)
|
I believe the chassis s/n was 24001 and up had the long reach spark plugs. One has to be careful because over the years engines and cylinder heads have been swapped out. The newer cylinder head always has a casting plug on the front and rear of the cylinder head face that takes a 7/16" wrench to install/remove it. The older short plug heads are smooth with no core casting plugs located there.
|
|
EPALLIS
Orange Level Joined: 12 Sep 2009 Location: Illinois Points: 1137 |
Post Options
Thanks(0)
|
Got it. Thanks Doc. My serial number is #36121. If you have time I'm curious to what the "S" stands for in the 45XLS? Thanks again!
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20548 |
Post Options
Thanks(0)
|
The electrode is a little deeper into the combustion chamber.
|
|
SteveM C/IL
Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8246 |
Post Options
Thanks(0)
|
Isn't it "extended tip" ? The porcelin and electrode stick out more than regular plugs.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |