Front wheel bearings for a G

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Good evening all. Those of you that had a visit from Ophelia hope everyone fared well. We lost a tree and had some minor flooding but all things considered we did ok. Now to my question. I am in the middle of a restoration project on a 1951 model G. I pulled the front wheels and was going to clean and repack the bearings. I literally had to beat the hubs off the tractor using a sledgehammer and large metal drift that my wonderful wife held for me. I had to heat one side to the point that it ruined the bearing but I finally got both hubs off. After cleaning everything I started measuring the bearings and the spindles. The inner bearings are Bower #1380 the outers were Timken #09081. The Bower inside diameter was .873-.874 the spindle measured .875. The inner bearing was .808-.809 and the spindle was .810. What are the correct bearings and grease seals I need to use? There’s no way I should have to drive the bearings on the spindle. I cleaned the spindle with emory cloth but still the bearing would not go on. If someone has the correct bearing and seal numbers I would be very great full if you would share the information. Thanks in advance.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pungobob Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 15 Mar 2023 Location: Belhaven NC Points: 83	Post Options Post Reply Quote pungobob Report Post Thanks(0) Quote Reply Topic: Front wheel bearings for a G Posted: 23 Sep 2023 at 8:53pm
	Good evening all. Those of you that had a visit from Ophelia hope everyone fared well. We lost a tree and had some minor flooding but all things considered we did ok. Now to my question. I am in the middle of a restoration project on a 1951 model G. I pulled the front wheels and was going to clean and repack the bearings. I literally had to beat the hubs off the tractor using a sledgehammer and large metal drift that my wonderful wife held for me. I had to heat one side to the point that it ruined the bearing but I finally got both hubs off. After cleaning everything I started measuring the bearings and the spindles. The inner bearings are Bower #1380 the outers were Timken #09081. The Bower inside diameter was .873-.874 the spindle measured .875. The inner bearing was .808-.809 and the spindle was .810. What are the correct bearings and grease seals I need to use? There’s no way I should have to drive the bearings on the spindle. I cleaned the spindle with emory cloth but still the bearing would not go on. If someone has the correct bearing and seal numbers I would be very great full if you would share the information. Thanks in advance.

Sponsored Links

Mikez Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8380	Post Options Post Reply Quote Mikez Report Post Thanks(0) Quote Reply Posted: 23 Sep 2023 at 9:39pm
	800445 seal 800449 inner bearing. Still available 800048 inner race 211897 outer race. still available 800186 outer bearing. still available 248104 kit

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81066	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 24 Sep 2023 at 7:43am
	sometimes it helps to put the NEWER "70" in front of the old ALLIS part numbers, if your searching the internet..... example. 70800449
	Like them all, but love the "B"s.