Loader Tractor D14 Hydraulic Control Valve ?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   My 1960 D-14 tractor with a Superior Mfg. (Chicago) Loader has the original 2 handle control valve, with lift and tilt.  The system works off the front mounted pump and the tilt circuit has had a slow leak down for while now.   System is full and clean.  Cylinders are not the culprit.. it is the valve/tilt circuit.    REPAIR OR REPLACE?  Is it likely seals or usually worse? 

Although fairly competent to wrench on all my old tractors and equipment,  I am COMPLETELY without experience on control valve/hydraulics.   REPAIR OR REPLACE?   I see several basic 2 handle control valves offered for a few hundred dollars , although I would have to sort out what I need.  Are they plug and play or require setup and flow gauge type pressure measuring tools etc?  

I sure don't want to take the tractor out of service for a long time while and try to learn how to "fix" the valve unless it is fairly simple.   My guess is a repair done professionally (if even possible on a 1960 setup) will cost about the same as a new control valve but I have no idea?     Looking for some basic insight experience .  

Thanks    

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
rasman57 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 12 Sep 2009 Location: Illinois Points: 404	Post Options Post Reply Quote rasman57 Report Post Thanks(0) Quote Reply Topic: Loader Tractor D14 Hydraulic Control Valve ? Posted: 18 Aug 2023 at 11:02am
	My 1960 D-14 tractor with a Superior Mfg. (Chicago) Loader has the original 2 handle control valve, with lift and tilt. The system works off the front mounted pump and the tilt circuit has had a slow leak down for while now. System is full and clean. Cylinders are not the culprit.. it is the valve/tilt circuit. REPAIR OR REPLACE? Is it likely seals or usually worse? Although fairly competent to wrench on all my old tractors and equipment, I am COMPLETELY without experience on control valve/hydraulics. REPAIR OR REPLACE? I see several basic 2 handle control valves offered for a few hundred dollars , although I would have to sort out what I need. Are they plug and play or require setup and flow gauge type pressure measuring tools etc? I sure don't want to take the tractor out of service for a long time while and try to learn how to "fix" the valve unless it is fairly simple. My guess is a repair done professionally (if even possible on a 1960 setup) will cost about the same as a new control valve but I have no idea? Looking for some basic insight experience . Thanks

Sponsored Links