Allis Chalmers 5020 Headlights - Repair

Recently I was updating our old 5020. I was searching on this site for some answers and while I found a few, many went unanswered. One thing i searched for was info on the headlights. I thought it would be simple to replace them. I found out that's not correct. It would essentially require a new mounting panel to be made and then mounting different headlights.

I decided to try a couple tings. I developed a 3 part solution. I don't really drive this thing after dark, and frankly I don't have the power hooked up to it yet. I developed a 3D printed insert that fits inside the stock housing on the tractor. I printed this out of PETG plastic so it's rigid. I desinged this flange to have 3 retaining scews. Currently they are M3 screws. That's what I happened to have, and it's fitting for the hodge-podge of American and metric components on this thing. I then 3d printed a lens retainer, and cut a lens out of 1/4" lexan that fits within the retainer.

I just thought I'd share in case it gave anyone ideas. I don't see many photos of tractors that still have their lenses.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
floordoc Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 17 May 2023 Location: Indiana Points: 5	Post Options Post Reply Quote floordoc Report Post Thanks(0) Quote Reply Topic: Allis Chalmers 5020 Headlights - Repair Posted: 18 May 2023 at 7:41am


Sponsored Links

floordoc Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 17 May 2023 Location: Indiana Points: 5	Post Options Post Reply Quote floordoc Report Post Thanks(0) Quote Reply Posted: 18 May 2023 at 7:42am
	Recently I was updating our old 5020. I was searching on this site for some answers and while I found a few, many went unanswered. One thing i searched for was info on the headlights. I thought it would be simple to replace them. I found out that's not correct. It would essentially require a new mounting panel to be made and then mounting different headlights. I decided to try a couple tings. I developed a 3 part solution. I don't really drive this thing after dark, and frankly I don't have the power hooked up to it yet. I developed a 3D printed insert that fits inside the stock housing on the tractor. I printed this out of PETG plastic so it's rigid. I desinged this flange to have 3 retaining scews. Currently they are M3 screws. That's what I happened to have, and it's fitting for the hodge-podge of American and metric components on this thing. I then 3d printed a lens retainer, and cut a lens out of 1/4" lexan that fits within the retainer. I just thought I'd share in case it gave anyone ideas. I don't see many photos of tractors that still have their lenses.