It has whipped me, I need some help

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   1963 Allis Chalmers Motor Grader
I have succcesfully rebuilt the low range box and have it mounted on the trans axle. The last gear that is on the main shaft has a snap ring that holds that gear on. I have a pair of snap ring pliers that I am trying to install the snap ring on through the bell housing hole and I just cannot get the snap ring in place. I have the gear shift lever off the side of the trans axle, there is not enough room nor can I see real well to put the snap ring on through the side opening. I know no other way than to go through the bell housing and that hole is very small. It is hard to work the pliers in this space. There has to be a better way. Any help you could give me would be greatly appreciated.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
sparky52 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 07 Jan 2019 Location: LOUISIANA Points: 39	Post Options Post Reply Quote sparky52 Report Post Thanks(0) Quote Reply Topic: It has whipped me, I need some help Posted: 29 Oct 2021 at 8:51pm
	1963 Allis Chalmers Motor Grader I have succcesfully rebuilt the low range box and have it mounted on the trans axle. The last gear that is on the main shaft has a snap ring that holds that gear on. I have a pair of snap ring pliers that I am trying to install the snap ring on through the bell housing hole and I just cannot get the snap ring in place. I have the gear shift lever off the side of the trans axle, there is not enough room nor can I see real well to put the snap ring on through the side opening. I know no other way than to go through the bell housing and that hole is very small. It is hard to work the pliers in this space. There has to be a better way. Any help you could give me would be greatly appreciated.

Sponsored Links

DiyDave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 51730	Post Options Post Reply Quote DiyDave Report Post Thanks(0) Quote Reply Posted: 30 Oct 2021 at 3:09am
	Some times it is easier to take the snap ring in hand, literally, and manipulate it on by hand, as far as you can, then take a long punch, and tap it on lightly, till it clicks on completely. Also, there are several types of SR pliers, some that attack it straight, while others have a 90 degree bend, at the tip... Some jobs are best attacked with a helper, too...
	Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

pinball Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 28 May 2014 Location: missouriu Points: 6102	Post Options Post Reply Quote pinball Report Post Thanks(0) Quote Reply Posted: 30 Oct 2021 at 6:39am
	its frustrating some times but i believe you will fix it.