Bigger than stockTires and Wheels?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Just by looking at my 13-6  24s on Stamped Steel D10 Wheels and 11x24 Jap rims compared to going up to 12-4 28s on any available combination of wheels and rims . Going to 28 rubber is going to add quite a bit to My CAs Total Weight.      When trying to make a 2500 pound puller out of my CA the 28 inch tires may make harder to do. 
    I have time today to weigh one of my 13-6 24 combinations for a number after I get all the water out.    Does anyone have a weight for a 28 tire, wheel and rim that will work on a CA?

     Most everyone agrees a 28 inch tire will outpull a 24 under most track conditions.

     Just for the sake of argument I have been outpulled by a bone stock CA on 11-2  24 rock hard weather checked rubber with chunks of cleats missing while I'm running stock on live rubber 13-6 24 Firestone F&R.   My theory.  The smaller tire dug a deeper hole down to hard packed track Plus the pounds per square inch of the footprint was greater with the smaller tire.  Go Figure.     I'm just glad this kid lost interest in pulling his CA where I pull.

Edited by Ken in Texas - 02 Apr 2019 at 6:30am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Ken in Texas Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Henderson, TX Points: 5919	Post Options Post Reply Quote Ken in Texas Report Post Thanks(0) Quote Reply Topic: Bigger than stockTires and Wheels? Posted: 02 Apr 2019 at 6:29am
	Just by looking at my 13-6 24s on Stamped Steel D10 Wheels and 11x24 Jap rims compared to going up to 12-4 28s on any available combination of wheels and rims . Going to 28 rubber is going to add quite a bit to My CAs Total Weight. When trying to make a 2500 pound puller out of my CA the 28 inch tires may make harder to do. I have time today to weigh one of my 13-6 24 combinations for a number after I get all the water out. Does anyone have a weight for a 28 tire, wheel and rim that will work on a CA? Most everyone agrees a 28 inch tire will outpull a 24 under most track conditions. Just for the sake of argument I have been outpulled by a bone stock CA on 11-2 24 rock hard weather checked rubber with chunks of cleats missing while I'm running stock on live rubber 13-6 24 Firestone F&R. My theory. The smaller tire dug a deeper hole down to hard packed track Plus the pounds per square inch of the footprint was greater with the smaller tire. Go Figure. I'm just glad this kid lost interest in pulling his CA where I pull. Edited by Ken in Texas - 02 Apr 2019 at 6:30am

Sponsored Links