| Author |
 Topic Search  Topic Options
|
190XTLP 
Bronze Level
Joined: 06 Oct 2009
Location: Jerseyville il.
Points: 51
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D19 HYDRAULICS
Posted: 23 Jun 2010 at 11:13am |
my D19 power director light comes on with hot oil at a medium idle and
when lifting a heavy load it lifts slow.Any ideas where to start?
|
|
WD45G,WD45D.190XTD,190XTLP
D19LP,WC unstyled,WF unstyled
WC styled,220
|
 |
|
Sponsored Links
|
|
|
Bob(FL)
Orange Level
Joined: 13 Sep 2009
Location: Cape Coral, FL.
Points: 1323
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2010 at 12:03pm |
|
I would start with changing the filter, if that does not fix it check pressure, light on means low pressure.
|
|
190XTLP
Bronze Level
Joined: 06 Oct 2009
Location: Jerseyville il.
Points: 51
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2010 at 1:51pm |
filter and oil is new,if pressure is low do you think pump
needs a rebuild?
|
|
WD45G,WD45D.190XTD,190XTLP
D19LP,WC unstyled,WF unstyled
WC styled,220
|
|
Bob(FL)
Orange Level
Joined: 13 Sep 2009
Location: Cape Coral, FL.
Points: 1323
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2010 at 1:59pm |
|
you power director pump and hydraulic pump are different, sounds like you have more than one problem.
|
|
DonDittmar
Orange Level
Joined: 15 Sep 2009
Location: MIllersburg, MI
Points: 2516
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2010 at 2:25pm |
Is your main clutch slipping??
|
|
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"
1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start
|
|
skipwelte
Orange Level
Joined: 29 Oct 2009
Location: Anthon, Iowa
Points: 723
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2010 at 4:10pm |
the pressure sender for the lite is up on the filter housing. plug a guage in there and see what the pressure is and see if in fact it does go down. All the PD pump does is pump oil to the filter and for lube of the PD gears. Lifting is a separate issue, may be the pump has some check ball springs broken which will cut down the flow, the more you try to lift the slower it will get. A relief usually doesnt act that way, it all or near nothing. you have to pull the pump to get to the check ball springs. HTH
|
|
