| Author |
 Topic Search  Topic Options
|
Bob C IL 
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 7000 trans input shaft
Posted: 03 Feb 2015 at 6:48pm |
|
What is the tooth count on input shaft of trans tha drives countershaft? Needin new gears to overdrive 4 th in the 3rd spot. Also if anyone has the 3rd gear set let me know. Black belly 7000!
|
 |
|
Sponsored Links
|
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Feb 2015 at 9:33pm |
|
Input gear driver (top)- 19 teeth
Input gear driven (bottom)- 35 teeth
Third gear driver (bottom) 23 teeth
Third gear driven (top) 27 teeth.
That is what they are on a 180 - 200. Although the shafts and shift lugs and shift couplers are different on a 7000 transmission, I think the ratios / tooth counts remain the same. If you want a gear over road gear / direct drive you will need to change both the input gear pair and 3rd gear pair.
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:11pm |
|
Mike accordin to my service manual input driver ? input driven 38 mainshaft 3rd 28 countershaft 3rd 22
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:31pm |
|
Okay. Then they did change the tooth counts along with everything else when the 7000 came along. Good to know.
I wonder if you check speed charts between a 190 and a 7000 with the same sized tires @ the same engine speed the MPH would be the same or very close to the same. Low would be low and intermediate on the 7000 would be high on the 190. If so the ratios are the same. If not they change the ratios too.
Either way if you want something faster than direct drive (without using the overdrive gears in the torque housing) my guess is you will need to change both input and third gear pairs.
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:46pm |
|
I can change PD main shaft drivin and drivin countershaft gears by 2 teeth and get 25.201 to 1 gear on high side PD shaft, but still just 1 gear to pull....
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:50pm |
|
Taking a quick look online, Tractor Data says the MPH between a model 200 and a 7000 is the same thing in 4th gear. Both being 12.3 MPH in low and 15.5 in intermediate for the 7000 and high for the 200. Where it gets weird is the MPH listed for the 7000 in third gear. The splits between 3rd low, intermediate, and high are not correct. They are not the same split percentage wise as they are for the 4th gear MPH's.
I think Tractor Data's data is incorrect for 3rd on a model 7000.
Doesn't change anything. You still need to change tranny gears. To get what you want.
|
|
O.P.S. Heads
Orange Level Access
Joined: 02 Jan 2013
Location: Iowa
Points: 574
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:52pm |
|
That's what I would consider. Look at the PD gears and see if you can make your overdrive a little closer to intermediate. I would guess making two PD gears would be much less costly than making new transmission gears. Then make a coupler to use the new high side gears.
ORRRR, get enough poop under the hood to run the stock overdrive gears.
Edited by O.P.S. Heads - 04 Feb 2015 at 4:53pm
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:56pm |
|
im at 27.885 straight through to ring and pinion... chang mainshaft PD driver to 27 from 29 and drivin on countershaft to 42 from 40 then lock in high side PD is 25.201 in 4th gear.
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 4:59pm |
|
stock OD is 22.341 that's a jump!!!! That a lot o cash!!!
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 5:02pm |
|
4 quick change gears in a separate box shoved inside PD housing would be easyer just gittin help to do it!!
|
|
rowcropmafia
Orange Level
Joined: 11 Sep 2009
Location: illinois
Points: 208
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2015 at 7:55pm |
|
If you at least had a easy way to put your tractor in overdrive there are a couple places like cayuga and paris that it might work a little better than the gear you are in. It is too fast even for those tracks but sometimes too fast is better than too slow. Some places that gear is an awful big chore to even get the sled rolling though
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Feb 2015 at 9:12pm |
I build a overdrive gearbox for 180-200. Have never put one in 7000, but it could be done. Problem is for you guys, the PD has to be removed. It's been a while since I've had a 7000 split but would like to have one split so I could see what it would take to put one of my boxes in one.
How far from 64647 are you guys? MACK 660 663 9173
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20551
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 4:19pm |
|
Bob, if you want to "over-drive" road gear in the tranny, don't you still have your intermediate gears and hollow shafts inside the torque tube ??? or is all that stuff removed??
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 6:26pm |
|
Yes still in there but it to tall a gear... 22 to 1. Need about 25 to1. At 27 now. Need to change driver and drivin on clutch and countershaft. Any ideas???
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 6:28pm |
|
Then run 4 over...
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20551
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 6:40pm |
|
Buy Mack's overdrive box and tailor the ratio to achieve exactly what you want in 4th gear. I see no reason it won't fit a 7000. Well, maybe the tranny input shaft is too long as compared to a 190-200...???
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 6:48pm |
|
Input on 7000 totally different but can prob be done
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 6:51pm |
|
Splitting tractor now to get out c shaft drivin and pd countershaft driving to get gears made. 2 teeth Change will get me there...
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20551
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 7:26pm |
|
Who's making the new gears for you ??
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 7:31pm |
|
Don't know
|
|
Bob C IL
Orange Level
Joined: 25 Sep 2009
Location: Paris IL
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Feb 2015 at 7:31pm |
|
Any ideas
|
|
