BE/CE block enhanced output pulling engines

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   As I've been cleaning up, I've found I have many parts to build a few Higher HP BE/CE engines. I can build 30HP for a little more than a standard rebuild and could build one to be in the 60 HP range. I could build something anywhere in between depending on the customers wants. I could take on consignments for these on a very limited basis.  I pulled a CA tractor for about 40 years with an unbeatable record of wins. So much that the 2500 pound class around me dried up as that number of entries got so low because others that were pulling in my class quit because they could never win against me. I have never had any engine that I've built fail. 
 For those seriously interested you could send a direct email to; the1orangewizard@gmail.com

Edited by PaulB - 06 Feb 2024 at 6:44am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4753	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Topic: BE/CE block enhanced output pulling engines Posted: 05 Feb 2024 at 6:27pm
	As I've been cleaning up, I've found I have many parts to build a few Higher HP BE/CE engines. I can build 30HP for a little more than a standard rebuild and could build one to be in the 60 HP range. I could build something anywhere in between depending on the customers wants. I could take on consignments for these on a very limited basis. I pulled a CA tractor for about 40 years with an unbeatable record of wins. So much that the 2500 pound class around me dried up as that number of entries got so low because others that were pulling in my class quit because they could never win against me. I have never had any engine that I've built fail. For those seriously interested you could send a direct email to; the1orangewizard@gmail.com Edited by PaulB - 06 Feb 2024 at 6:44am
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY

Sponsored Links

PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4753	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Posted: 09 May 2024 at 8:13pm
	I've been working on enhanced power from the BE/CE block for more that 40 years. I've developed a few tweaks that allow for highly increased power while retaining durability. Of all the engines I built over the years, not one has had a failure.
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY

PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4753	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Posted: 27 May 2024 at 7:36pm
	I have a commitment to built the 60HP CE block I have parts for. I would still be able to build a few lower HP engines.
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY