| Author |
 Topic Search  Topic Options
|
bgolat 
Bronze Level
Joined: 30 Jul 2012
Location: Eau Claire WI
Points: 18
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: B-110 no spark
Posted: 08 Jul 2021 at 5:23pm |
|
I bought an Allis B-110 couple weeks back. The guy I bought it from said he thinks the coil module is bad, but not sure? There is no spark but he said it ran great then just didnt have spark. I have traced it back to the coil but I am waiting on the part to put it in. I ran into the guy yesterday and he said he also had the fiber board by the points fail about 2 years ago so he just byppassed it and tied the wires together. I'm wondering what this part is hes talking about and could this "fiber board" or what ever the real name is, be the reason the coil failed? I s anyone familiar with the b-110 electrical set-up? and can you tell me what this part is? Thanks
|
 |
|
Sponsored Links
|
|
|
dee_veloper
Orange Level
Joined: 12 Apr 2021
Location: USA
Points: 1168
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Jul 2021 at 3:04am |
|
I have an Allis B-110 and there is no "fiber-board" by the points. My tractor has the original Briggs engine model 243431 and the points are in a small metal enclosure on the side of the engine block. There is gasket between the cover and the block, although I doubt he is referring to that.
Perhaps you have a different engine ?
|
|
Don't confuse my personality with my attitude.
My personality is who I am. My attitude depends on who you are.
|
|
oldfords
Bronze Level Access
Joined: 31 Mar 2020
Location: South Dakota
Points: 49
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2021 at 8:46am |
|
Some of the old Briggs engines had a fiber board attached to the top screw on the points cover. One wire on the board came from the points and another wire went to the key switch. On those old engines when the mag went bad, we would just put on an external 12 volt resistor coil and run a wire to the points and another to the key switch. If you do this, you must change the key switch from a ground switch to a switch that will supply power to the coil when turned on. A lot easier than pulling the engine to get at the mag, and a hotter stark.
|
|
dee_veloper
Orange Level
Joined: 12 Apr 2021
Location: USA
Points: 1168
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jul 2021 at 1:44pm |
|
After I first got my B-110, I also had to replace the coil. Quite a chore. But it brought back the spark :)
Another thing, which I did for my engine, is to replace the points and condensor with a NOVA ignition module. Made a tremendous improvement in strength of spark and engine running smooth. Engine starts very easily and stops without run-on.
Costs about $20 and takes about 20 minutes to swap. Best investment I made into that engine.
|
|
Don't confuse my personality with my attitude.
My personality is who I am. My attitude depends on who you are.
|
|
NorthernChill
Bronze Level
Joined: 01 Jul 2017
Location: Elk Mound WI
Points: 7
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Aug 2021 at 9:46pm |
|
Thank you all for the replies, I got it going and bypassed the points and condencer by going with a new coil. Thanks for everything
|
|
