| Author |
 Topic Search  Topic Options
|
amac 
Silver Level
Joined: 11 Nov 2010
Location: Kalona, IA
Points: 241
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: allis 5015 or 620/720
Posted: 28 Apr 2012 at 1:20pm |
|
I am interested in buying an allis 5015 or 620/720. Which would be a better buy for mowing and some light duty yard work? Are parts equally available? Is one more reliable than the other? I know the 720's had an Onan engine originally and that there are some after market engines which can drop in. What about the 5015 engine? What brand is it and are there replacements? Thanks for any info.
|
 |
|
Sponsored Links
|
|
|
Charlie175
Orange Level
Joined: 11 Sep 2009
Location: Shenandoah, VA
Points: 6357
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 3:15pm |
|
I would go with a 5015, more capable in my thinking.
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 4862
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 3:46pm |
|
I think for mowing, you'll like the hydro on the 620/720 better, plus a little more power, even more if re-powered by 24hp honda. I have a 720 with the 60" deck, and when tuned up it has plenty of power, but it does seem to need points attended to fairly often. I always wanted a compact tractor though. 5015/5020/5030. These compact tractors are made in Japan by Toyosha, sold as MF too around same era. 5015 is a tiny 3 cyl diesel, 5020/5030 use larger, 2 cylinder diesel engines. The 616/620/720 were built by Simplicity (AC co) with Sundstrand Hydro unit, and a 3 speed transaxle. (not sure who built transaxle) Good luck with whichever you decide. Ed.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
den/southern illinoi
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 1969
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 3:59pm |
|
I just got a 5015 last night and ran it around some today. I also have 6 720 units. As Ed indicated, if you are going to mow, the 720 will run circles around the 5015. I have a tiller for my 720 and if there is a weak point in the 616/620/720 s....it is the rear PTO. Counting doner units...both Allis and Simplicity...I have had or have a total of 9 units and only 2 good rear PTO s among the 9 units. I will be looking at converting the tiller for my 720 to put it on the 5015. The 720 rear PTO runs engine speed so without converting the existing tiller for the 5015's 540 PTO, the tiller will not have and rotating speed. In other words, for tilling, there is no doubt that the 5015 will till around the 720. Besides being a stouter PTO set up, the 5015 has a 3 speed tranny with 3 ranges, High, Low and Creep. In 1st gear, creep range, it does move but you almost need to drive a stake along side to make sure it is moving. I'm thinking about looking for some of those "Slow races". I think I could have a winner.
Both units have their good and bad points. The easiest way to resolve the problem is to get one of each. LOL. Den
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
|
Dale H. ECIL
Orange Level
Joined: 11 Sep 2009
Location: Paris, Il
Points: 690
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 4:37pm |
|
Den, I agree with you on the "slow race", I have put my 5030 in some local shows in the slow race and win every time.
|
|
Allis Chalmers Museum, Paris, Il.http:// www.allischalmersmuseum.com 217-275-3428
|
|
Kurzy
Orange Level
Joined: 02 Nov 2009
Location: WSS, Montana
Points: 808
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 5:17pm |
Howdy, Just remember the 620/720 are lawn mowers. The 5015 is a tractor. Real 3 point,540 pto,diff lock,diesel,and comes in 4x4. Here is mine still for sale in WI. Thanks Kurzy  |
|
den/southern illinoi
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 1969
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2012 at 5:36pm |
|
Yes, I would agree with Kurzy. While I think a lot of the 720 s and as I said, have 6 of them, from what little I have done with the 5015, the 720 will not hold a candle to the 5015 for a lot of things. Den
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
|
vgac
Bronze Level
Joined: 14 Oct 2009
Location: algona, ia
Points: 31
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2014 at 3:12pm |
|
What is your price Kurzy?
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7304
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2014 at 4:17pm |
|
I think you will have better luck getting parts for the 620/720. Many more of them around and made in the USA. Unless you have contacts in Japan, I think parts are hard to come by for the 5015.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
