Air blast sprayer

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Backpack model, anybody use one for the garden?  I am adding a mister kit to a backpack blower, and wondered if anyone has any experience with this type of sprayer.  Specifically, the kit is from an Echo sprayer, and I am mounting it on a different blower.  I would assume from what I read in the installation manual, the tank is pressurized from the blower, forcing the liquid down a hose to a nozzle, at the end of the blower tube.  I also assume that you would want to drill the air supply line as near to the outside radial surface of the fan housing as possible, to take advantage of the mechanical advantage of the fan. (it sucks air near the center of the fan, and blows it toward the outside edge.  There are no turbine shaped fins, just straight across)  Any comments, tips, discussion appreciated

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
DiyDave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 52535	Post Options Post Reply Quote DiyDave Report Post Thanks(0) Quote Reply Topic: Air blast sprayer Posted: 22 Dec 2010 at 4:56pm
	Backpack model, anybody use one for the garden? I am adding a mister kit to a backpack blower, and wondered if anyone has any experience with this type of sprayer. Specifically, the kit is from an Echo sprayer, and I am mounting it on a different blower. I would assume from what I read in the installation manual, the tank is pressurized from the blower, forcing the liquid down a hose to a nozzle, at the end of the blower tube. I also assume that you would want to drill the air supply line as near to the outside radial surface of the fan housing as possible, to take advantage of the mechanical advantage of the fan. (it sucks air near the center of the fan, and blows it toward the outside edge. There are no turbine shaped fins, just straight across) Any comments, tips, discussion appreciated

Sponsored Links