This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


8030 tach
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
Steele View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 14 Sep 2009
Location: Wisconsin
Points: 22 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Steele Quote  Post ReplyReply Direct Link To This Post Topic: 8030 tach
    Posted: 17 May 2011 at 9:55pm
My tack and hour meter is not working.  Thought the sending unit was bad so ordered a new one and installed, no luck.  Does it matter what wire gets connected to which wire on the harness?  There are two wires that appear to be the same color.  Is there a way to test the sending unit?  Also where do I go from here as far as testing?  Seems funny that the hour and tach both quit working is why I figured it was the sending unit.
 
thanks
 
Steele
Back to Top
Sponsored Links


Back to Top
MACK View Drop Down
Orange Level
Orange Level


Joined: 17 Nov 2009
Points: 7664 		Post Options Post Options   Thanks (0) Thanks(0)   Quote MACK Quote  Post ReplyReply Direct Link To This Post Posted: 18 May 2011 at 7:02am
Make sure you are getting 12V to tack.   MACK
Back to Top
allisorange View Drop Down
Silver Level
Silver Level
Avatar

Joined: 27 Mar 2010
Location: perkins, michig
Points: 381 		Post Options Post Options   Thanks (0) Thanks(0)   Quote allisorange Quote  Post ReplyReply Direct Link To This Post Posted: 18 May 2011 at 7:14am
 
       Listen to Mack, When the one on are tractor quite it was a bad connection and no power to the tach.
 
                                        John Carlson
Back to Top
bill2260 View Drop Down
Silver Level
Silver Level


Joined: 30 Mar 2010
Points: 215 		Post Options Post Options   Thanks (0) Thanks(0)   Quote bill2260 Quote  Post ReplyReply Direct Link To This Post Posted: 18 May 2011 at 10:49am
I have 8030 too. Tach works, hour meter dosn't. Is there anything to try to get it to work. Repair manual said something about check the ground. Would the tach and hour meter have a different ground? I noticed some wires grounded on the steering column, but they came up from bottom of tractor, not down from the tach hour meter. Bill
Back to Top
jb from md View Drop Down
Silver Level
Silver Level
Avatar

Joined: 06 Apr 2010
Location: Keymar MD
Points: 450 		Post Options Post Options   Thanks (0) Thanks(0)   Quote jb from md Quote  Post ReplyReply Direct Link To This Post Posted: 18 May 2011 at 8:07pm
remember that just because the sensor is new doesnt mean that its a good one! we had 4 gm blower motor resistors in a row that were bad at the garage the 5th one was good ,took a while for the parts guy to believe it, there is many times this happens with new parts. check the wires from the sensor to the tach for continuity to make sure you dont have a broken wire, then if they are good its probably the tach- JMO-...Jb
8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.289 seconds.


Help Support the
Unofficial Allis Forum