This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
720 Cold Start |
Post Reply |
Author | |
Dave (NE)
Orange Level Joined: 12 Sep 2009 Location: Eagle Nebraska Points: 2148 |
Post Options
Thanks(0)
Posted: 22 Dec 2018 at 9:27pm |
My 720 is really difficult to start first thing in the day. Hasn't been getting that cold at night, maybe down to freezing. Warms up pretty nice to mid 40's during the day. Have been needing to use ether most times to start it first time for the day. After that, starts and runs well. Is this characteristic of the 720's? Do others have this issue? Dave
|
|
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.
|
|
Sponsored Links | |
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11802 |
Post Options
Thanks(0)
|
Check the choke cable. Sometimes they get loose in the clamp and the whole conduit moves and not the cable. I've had customer's tell me that with their 620/720's... Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
Dave (NE)
Orange Level Joined: 12 Sep 2009 Location: Eagle Nebraska Points: 2148 |
Post Options
Thanks(0)
|
It is moving on the carburetor. I looked at that first thing, but I'll check it again.
|
|
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.
|
|
AC720Man
Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4919 |
Post Options
Thanks(0)
|
Ive found if I haven’t run mine for a month or so it does take a few turn overs to fire up. But I wouldn’t say its hard to start. One of my 720’s starts better than the other, but cant complain about either tractor. Good plugs, timing, battery, points are all very important for easy starts. One of my 720’s has over 1,100 hrs and still starts and runs very well. Key is not to flood it. Doesn’t take much throttle and choke to have her running.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
Krazy Karl
Silver Level Joined: 12 Sep 2011 Location: SE MN Points: 203 |
Post Options
Thanks(0)
|
Check that the choke butterfly is fully closing in the housing. Check fuel line that isn't cracked and bleding fuel back
|
|
Dave (NE)
Orange Level Joined: 12 Sep 2009 Location: Eagle Nebraska Points: 2148 |
Post Options
Thanks(0)
|
Well, went out this morning to double check the choke cable. I was able to move the choke a miniscule amount. Started up after only a few cranks over. Adjusted the cable a little bit. We'll see if that remedies the situation. Thanks for the input. Dave
|
|
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.
|
|
Dave (NE)
Orange Level Joined: 12 Sep 2009 Location: Eagle Nebraska Points: 2148 |
Post Options
Thanks(0)
|
Tried it again this morning, and it fired right up. Guess that slight amount of choke adjustment made quite a difference.
|
|
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |