190 XT - No hydraulics

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I recently bought a series 3 XT diesel that had been setting for a long time.  I have no idea about what the previous owner had been doing with it, or any other history.  The pump looks new and shiny, but the right deck panel is missing (valve and filter access), and the panel to access the hydraulic levers was off.  I have power steering, and the tractor drives fine, but there isnt any response when I hit the remotes, and the 3 point doesnt raise.  When I move the position control up all the way, the 3 point comes up some, but it still doesnt respond to the main control lever.  I have NOT changed fluids yet.  I didnt want to waste new fluid if I needed to tear something down and rebuild it.   Thanks for the help.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Adam Stratton Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: SW MO Points: 1363	Post Options Post Reply Quote Adam Stratton Report Post Thanks(0) Quote Reply Topic: 190 XT - No hydraulics Posted: 23 Mar 2010 at 8:51pm
	I recently bought a series 3 XT diesel that had been setting for a long time. I have no idea about what the previous owner had been doing with it, or any other history. The pump looks new and shiny, but the right deck panel is missing (valve and filter access), and the panel to access the hydraulic levers was off. I have power steering, and the tractor drives fine, but there isnt any response when I hit the remotes, and the 3 point doesnt raise. When I move the position control up all the way, the 3 point comes up some, but it still doesnt respond to the main control lever. I have NOT changed fluids yet. I didnt want to waste new fluid if I needed to tear something down and rebuild it. Thanks for the help.

Sponsored Links

Dans 7080 Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 05 Feb 2010 Points: 1146	Post Options Post Reply Quote Dans 7080 Report Post Thanks(0) Quote Reply Posted: 24 Mar 2010 at 1:55am
	Our 200 had some hyd problems the 3pt wouldnt lower and you could always hear the pump running. The first thing i would check is the linkage on the traction booster lever. Ours kept moving with out the lever moving. Have a buddy (or you) watch which linkage is moving when the lever moves when the lever is all the way down or up move the linkage (under the cab or platform) in the same way it was moving when the lever was moving all the way. This has fixed ours and a few buddys tractors that had the same problem. Might be something totally different but this is a cheap fix. BTW ours drove and steered fine when this happens. Dan

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20873	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 24 Mar 2010 at 6:25am
	Which hydraulic pump do you have ???? there are two possibilities on a series 3.