Farm Equipment - 6080 crankshaft

Print Page | Close Window

6080 crankshaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212509
Printed Date: 14 Oct 2026 at 8:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 crankshaft

Posted By: Paulb66
Subject: 6080 crankshaft
Date Posted: 14 Oct 2026 at 5:59pm

I’m looking for a crankshaft for a 6080 Allis chalmers if anyone has one they are interested in selling or possibly a decent engine let me know. The crank in it is past turning. I tried cooks and another salvage place close to me and they didn’t have any. Thanks

Replies:

Posted By: DrAllis
Date Posted: 14 Oct 2026 at 6:59pm

Yours is bad where ??

Posted By: Paulb66
Date Posted: 14 Oct 2026 at 7:50pm

I don’t have it clear out yet I just have one rod cap off so far and it’s going to be over 30000 if it were turntable. I can feel at least one more had to much wear as well. I bought the tractor non running got it started and immediately could tell this wasn’t one of those lucky barn finds that runs great so I don’t know any history. After I found the issue with the crank and the fact it may be hard to find one I didn’t tear it apart anymore as I may look for a motor or sell it as is If it’s going to be more than I want to put into the tractor.

Posted By: DrAllis
Date Posted: 14 Oct 2026 at 8:02pm

Welding up rod journals on an expected-to-work diesel engine usually doesn't go well. Try Heitmans in Durand , Wisconsin