Farm Equipment - 7060 cab floor

Print Page | Close Window

7060 cab floor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212356
Printed Date: 27 Sep 2026 at 1:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 cab floor

Posted By: whatscooking
Subject: 7060 cab floor
Date Posted: 27 Sep 2026 at 7:18am

Have had the cab floor out going after leaks. When I pulled the mat there was a piece of angle laying by the console unhooked under the mat. Bolt holes line up, only one in console has threads and one on floor. Saw a Pic of a ragged out 7060 that had that angle on top of the mat with one bolt into console and one into the floor, looks only as a matt holder,is that correct?
Also obviously that console side cover has got to come off to get to the cable ends. How scary of a project is it to open that up?

-------------
68 D21 81 7060

Replies:

Posted By: DrAllis
Date Posted: 27 Sep 2026 at 7:24am

Angle iron at the front corner ?? bolts to the floor to stabilize the console assembly. That was added when they went to the "T"-shifter for the Power Director and even tho it may be a Power Shift, still had that brace. It isn't for the floor mat.

Posted By: whatscooking
Date Posted: 27 Sep 2026 at 7:25am

Top or under the mat?

-------------
68 D21 81 7060

Posted By: DrAllis
Date Posted: 27 Sep 2026 at 7:52am

UNDER ...directly to the cab floor for a brace/support.