Construction and other equipment

Print Page | Close Window

belts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211075
Printed Date: 17 Sep 2026 at 4:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: belts

Posted By: allisdozer
Subject: belts
Date Posted: 12 May 2026 at 5:46am

Does anyone have any tips changing engine fan belts HD16 dozer. Does the hydraulic pump need to be pulled out of the way? Seems like they would engineer it better. But maybe not. Any advise is appreciated. Thanks in advance

Replies:

Posted By: Ray54
Date Posted: 13 May 2026 at 12:25pm

Can not say on your tractor, as I have been there on a HD 16. But others I have worked on have double u joint drive. Many times 6 or 8, 3/8 bolts holding a plate inside the front pully. All of that type I have done you can remove drive coupling without moving the pump.

Posted By: allisdozer
Date Posted: 13 May 2026 at 12:36pm

this has 6 bolts on crank pulley holding driveshaft on, but no room in the shaft to slide it back and out of the way