| Author |
 Topic Search  Topic Options
|
ACinSC 
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 3379
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Truck oil change
Posted: 5 hours 44 minutes ago at 5:55am |
|
Did my truck yesterday
I'm 73 and had both knees replaced. Plan to keep doing my own oil changes as long as I can, but I'm beginning to think it won't be much longer. Any thoughts? Thanks
|
 |
|
Sponsored Links
|
|
|
sho-man1
Bronze Level Access
Joined: 14 Sep 2009
Location: Wylie, TX
Points: 198
|
Post Options
Thanks(0)
Quote Reply
Posted: 4 hours 39 minutes ago at 7:00am |
I like to use the shop vac for assistance when pulling the oil pan drain plug. I place the catch pan under the drain plug, loosen the plug, place the shop-vac pickup hose onto the oil fill port on the valve cover, turn the vac on. Remove the drain plug then shut the vacuum off. Hands get no oil on them and no splash into the catch pan. The Ford 7.3 has over 15 quarts of oil, so I don't like to spill any.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 23573
|
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 42 minutes ago at 8:57am |
|
Four post hoist. Drive vehicle on. Raise up. Drain oil and change filter. Let down and fill with oil. Never have to bend over or get down on your knees. Problem solved.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 93261
|
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 30 minutes ago at 9:09am |
|
i still do the truck and car at 73 years old... Got both original knees ... but YES, it is begining to be a chore to "get back up" when you laying on the ground..
|
|
Like them all, but love the "B"s.
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: Mid Central MO
Points: 2734
|
Post Options
Thanks(0)
Quote Reply
Posted: 1 hour 20 minutes ago at 10:19am |
|
I'm 69, still do my truck, all original parts, however, left knee and hip aren't as limber as before. Send the wife to the dealership with her car, too low to the ground, even on ramps, and I'm out of the crosshairs if it isn't done in her timeframe.
|
|
Maximum use of available resources!
|
|
ACinSC
Orange Level
Joined: 16 Dec 2015
Location: South Carolina
Points: 3379
|
Post Options
Thanks(0)
Quote Reply
Posted: 1 hour 7 minutes ago at 10:32am |
|
15 quarts! That's a lot, good idea with the shop vac. My truck holds 8 quarts. Dr Allis,a lift sure would be sweet. Thanks guys
|
|
Les Kerf
Orange Level
Joined: 08 May 2020
Location: Idaho
Points: 1922
|
Post Options
Thanks(0)
Quote Reply
Posted: 39 minutes ago at 11:00am |
I have been installing Fumoto quick drain valves on my vehicles; they don't help with the problem of old age and bad knees but they do minimize the time and effort underneath the rig. Plus, I can slip a hose over the valve and direct the stream to reduce splashing. I like to drain the oil while hot and let it drip over night.
|
|
