D19 Gas possible governor surge?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Have been getting some time in the furrow with my D19 Gas pulling a series 70 SC set on 5-14"s. Tractor was overhauled from the bell housing froward this past spring. It was handling the plow real well imho from the getgo. Plow was not scoured and hadnt turned a furrow in a long time. Tractor ran fine plowing in third gear making 6 passes about 100 yards long. Got dark and put it back in the shed. 2 days later, resumed plowing in a different field making passes about 1/8 mile long each. after 2 rounds tractor starts to sound like the governor was causing a surge in rpm at WOT. Got out the service manual and tried to adjust out the rpm surge per instructions. Set low and high rpm's and then turned in the anti-surge screw till I raised the high idle to 2300. Went back to the field and made another pass, but the adjustment I made did not help much at all, tractor still experienced high/low engine rpm's. Hopefully the video will load. Any advice is appreciated!uploads/24926/IMG_0592.jpeg Edit: Video is too big to load

Edited by Buddy2366 - 1 hour 55 minutes ago at 7:55pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Buddy2366 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 14 Jul 2024 Location: ECIL Points: 40	Post Options Post Reply Quote Buddy2366 Report Post Thanks(0) Quote Reply Topic: D19 Gas possible governor surge? Posted: 2 hours 2 minutes ago at 7:48pm
	Have been getting some time in the furrow with my D19 Gas pulling a series 70 SC set on 5-14"s. Tractor was overhauled from the bell housing froward this past spring. It was handling the plow real well imho from the getgo. Plow was not scoured and hadnt turned a furrow in a long time. Tractor ran fine plowing in third gear making 6 passes about 100 yards long. Got dark and put it back in the shed. 2 days later, resumed plowing in a different field making passes about 1/8 mile long each. after 2 rounds tractor starts to sound like the governor was causing a surge in rpm at WOT. Got out the service manual and tried to adjust out the rpm surge per instructions. Set low and high rpm's and then turned in the anti-surge screw till I raised the high idle to 2300. Went back to the field and made another pass, but the adjustment I made did not help much at all, tractor still experienced high/low engine rpm's. Hopefully the video will load. Any advice is appreciated!uploads/24926/IMG_0592.jpeg Edit: Video is too big to load Edited by Buddy2366 - 1 hour 55 minutes ago at 7:55pm

Sponsored Links